EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrochemical Detection of 17α‐Ethinylestradiol Using a Tungsten Oxide Nanoparticle–Modified Glassy Carbon Electrode

Ginny S. Masunga, Alex T. Kuvarega, Ntuthuko W. Hlongwa, Bart M. Bartlett, Usisipho Feleni

Journal of Nanotechnology · 2026-01 · 2026 (1)

DOI: 10.1155/jnt/2461908 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Nanotechnology, online erschienen am 24.06.2026. Verfasst von Ginny S. Masunga und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A simple, efficient and inexpensive electrochemical sensor based on a tungsten oxide–modified glassy carbon electrode (WO 3 /GCE) was used to detect the synthetic oestrogen 17 α ‐ethinylestradiol (EE2) in river water samples. EE2 is an active component of oral contraceptives, and it is considered an endocrine disruptor. Its environmental presence is of great concern, making its detection critically important, especially given the potential harmful effects of EE2 on aquatic ecosystems and human health. This paper highlights a facile synthesis method for tungsten oxide nanoparticles (WO 3 ) designed for the electrochemical detection of EE2. The physical and chemical properties of WO 3 were evaluated using a variety of techniques, including X‐ray diffraction, which confirmed the monoclinic phase; scanning electron microscopy coupled with energy‐dispersive X‐ray spectroscopy, which revealed irregularly shaped particles; and Raman spectroscopy and Fourier‐transform infrared spectroscopy, both of which confirmed the existence of W‐O bonds. Cyclic voltammetry and differential pulse voltammetry were used for electrochemical characterisation. WO 3 was used to modify the GCE to form the WO 3 /GCE electrochemical sensor. The results showed a well‐defined irreversible oxidation peak (PBS buffer, 0.1 M, pH 7.4) at 0.61 V (vs Ag/AgCl). The sensor demonstrated good performance, achieving a detection limit of 65 nM within a linear concentration range of 0.1 μM–4.3 μM. This simple and easy‐to‐prepare electrochemical sensor showed good reproducibility, satisfactory selectivity and sensitivity. The recovery experiments showed values between 99.6% and 86.1% for spiked samples, thus indicating the applicability of the electrochemical sensor in EE2 detection in natural water samples.

Zitieren

APA

Masunga, G. S., Kuvarega, A. T., Hlongwa, N. W., Bartlett, B. M., & Feleni, U. (2026). Electrochemical Detection of 17α‐Ethinylestradiol Using a Tungsten Oxide Nanoparticle–Modified Glassy Carbon Electrode. Journal of Nanotechnology, 2026(1). https://doi.org/10.1155/jnt/2461908

Vancouver

Masunga GS, Kuvarega AT, Hlongwa NW, Bartlett BM, Feleni U. Electrochemical Detection of 17α‐Ethinylestradiol Using a Tungsten Oxide Nanoparticle–Modified Glassy Carbon Electrode. Journal of Nanotechnology. 2026;2026(1). doi:10.1155/jnt/2461908

BibTeX
@article{Masunga2026,
  author = {Masunga, Ginny S. and Kuvarega, Alex T. and Hlongwa, Ntuthuko W. and Bartlett, Bart M. and Feleni, Usisipho},
  title = {Electrochemical Detection of 17α‐Ethinylestradiol Using a Tungsten Oxide Nanoparticle–Modified Glassy Carbon Electrode},
  journal = {Journal of Nanotechnology},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/jnt/2461908}
}
Kostenlos starten →