Evaluating the Fluid Loss and Carrying Capacity of Water‐Based Muds Treated With Wheat Husks and Periwinkle Shells
Journal of GeoEnergy · 2025
DOI: 10.1155/jge5/9068189 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of GeoEnergy, 2025. Verfasst von Hussein Omeiza Aliu und 2 weiteren Autor:innen. Die Arbeit nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The formulation of drilling fluids with the desired characteristics required to achieve a successful drilling operation depends largely on the drilling additives. In this study, we investigated the potential of two agrowastes, wheat husks (WHs) and periwinkle shells (PSs) as additives in water‐based drilling fluids (WBFs). The experimental study was conducted according to API RP 13B‐1 standard procedure at ambient condition. A comparative study was conducted between a reference fluid (RF) formulated with 2.0 g carboxymethyl cellulose (CMC) and six additional samples formulated with varying concentrations of the additives alone and in combination with CMC. PS slightly enhanced pH and mud weight (MW) better than WH. The combination of the additives with CMC in the ratio 1:10 as in E and F yielded the best samples with rheological properties closest to the RF (A). Sample A yielded a filtrate loss of 8.50 mls, while both D and E formulated with WH and CMC yielded the best comparable volume of 10.90 mls and same cake thickness of 0.05 mm. At an annular velocity of 40 ft/min, Sample A showed the best carrying capacity with a cuttings carrying index (CCI) of 0.97. Samples C, E, F, and G gave CCI values in the range of 0.43–0.54. B yielded a very poor CCI of 0.04, while D gave a very high CCI of 2.49 above the acceptable range of 1.0–1.5. An increase in the concentration of the additives increased most of the mud properties, while aging reduced it. The Herschel–Bulkey and Sisko models fit the drilling fluids better than the two‐parameter models. The cost of WH and PS were found to be lower than that of CMC by 97.5% and 99.8%, respectively. A barrel of D and E also cost less by 2.6% and 3.04%, respectively. Analysis of carrying capacity is recommended to ensure additives not only improve the targeted properties but also produce muds with good hole cleaning features. Utilizing agrowastes as additives for improved drilling fluid performance saves costs and reduces the volume of wastes and their environmental impact.
Zitieren
APA
Aliu, H. O., Akinsete, O. O., & Falade, A. A. (2025). Evaluating the Fluid Loss and Carrying Capacity of Water‐Based Muds Treated With Wheat Husks and Periwinkle Shells. Journal of GeoEnergy. https://doi.org/10.1155/jge5/9068189
Vancouver
Aliu HO, Akinsete OO, Falade AA. Evaluating the Fluid Loss and Carrying Capacity of Water‐Based Muds Treated With Wheat Husks and Periwinkle Shells. Journal of GeoEnergy. 2025. doi:10.1155/jge5/9068189
BibTeX
@article{Aliu2025,
author = {Aliu, Hussein Omeiza and Akinsete, Oluwatoyin Olakunle and Falade, Adetokunbo Ademola},
title = {Evaluating the Fluid Loss and Carrying Capacity of Water‐Based Muds Treated With Wheat Husks and Periwinkle Shells},
journal = {Journal of GeoEnergy},
year = {2025},
doi = {10.1155/jge5/9068189}
}
EUVIMED