EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Construction of an Automatic Open‐and‐Close Waste Bin With Fullness Control

Joseph Amajama, Remigus Asochukwu Umunnah, Samuel Eyeh Mopta, Ahmed Tunde Ibrahim, Brian E. Usibe, Francis Idiege Ahakiri, Musa Moses Egaga, Prince Chigozie Iwuji, Alexander I. Ikeuba, Wilson Chinagorom Nwoko

Journal of Electrical and Computer Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/jece/8188065 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrical and Computer Engineering, online erschienen am 28.10.2026. Verfasst von Joseph Amajama und 9 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The construction and experimental evaluation of an automatic open‐and‐close waste bin with fullness control are presented. The system combines an ultrasonic proximity sensor for contactless lid activation with a light‐dependent resistor (LDR) and an internal LED for fullness interlocking. Unlike systems that only indicate a full container, the proposed design inhibits further disposal once the fullness optical path is interrupted. The prototype was evaluated over 30 days across 112 operating trials at indoor temperatures of 27°C–31°C and illuminance levels of 300–500 lx. The lid opened when a user was detected within 0–100 cm (0–1 m). The total opening duration lasted approximately 1.00 s in 16 trials (14.3%), approximately 1.10 s in 83 trials (74.1%), and approximately 1.20 s in 13 trials (11.6%), yielding a mean latency between activation and opening of the bin lid of 1.0973 ± 0.051 s (mean ± SD; 98% CI: 1.0859–1.1087 s). All 112 trials were completely successful, representing a sample success proportion () of 1.0 (100%; 98% Wilson score CI: 95.39%–100.00%). No false‐opening or false‐full events occurred under the defined test conditions. Fullness testing used dry paper, plastic, and polythene waste without sand or particulate contaminants. The maximum operating power was 16 W (2 A at 8 V). The opaque bin body isolates the LED–LDR pair from external room lighting, while a nonreflective internal optical region minimizes stray reflections. The principal contribution is the experimentally validated integration of proximity activation, an optically isolated LDR–LED fullness lockout, quantified lid‐opening latency, and complete functional success under defined indoor conditions in a low‐complexity rugged electromechanical prototype.

Zitieren

APA

Amajama, J., Umunnah, R. A., Mopta, S. E., Ibrahim, A. T., Usibe, B. E., Ahakiri, F. I., Egaga, M. M., Iwuji, P. C., Ikeuba, A. I., & Nwoko, W. C. (2026). Construction of an Automatic Open‐and‐Close Waste Bin With Fullness Control. Journal of Electrical and Computer Engineering, 2026(1). https://doi.org/10.1155/jece/8188065

Vancouver

Amajama J, Umunnah RA, Mopta SE, Ibrahim AT, Usibe BE, Ahakiri FI, et al. Construction of an Automatic Open‐and‐Close Waste Bin With Fullness Control. Journal of Electrical and Computer Engineering. 2026;2026(1). doi:10.1155/jece/8188065

BibTeX
@article{Amajama2026,
  author = {Amajama, Joseph and Umunnah, Remigus Asochukwu and Mopta, Samuel Eyeh and Ibrahim, Ahmed Tunde and Usibe, Brian E. and Ahakiri, Francis Idiege and Egaga, Musa Moses and Iwuji, Prince Chigozie and Ikeuba, Alexander I. and Nwoko, Wilson Chinagorom},
  title = {Construction of an Automatic Open‐and‐Close Waste Bin With Fullness Control},
  journal = {Journal of Electrical and Computer Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/jece/8188065}
}
Kostenlos starten →