EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Micromachining of Additively Manufactured Nickel Alloy: Effect of Biodegradable MQL on Tool Wear and Surface Quality

Raman Kumar, K. Prakash, Vikasdeep Singh Mann, A. C. Umamaheshwer Rao, Ashutosh Pattanaik, Manoj Kumar Ojha, Ashwin Jacob, Hrushikesh Sarangi, Lema Abate

Journal of Engineering · 2025-01 · 2025 (1)

DOI: 10.1155/je/7252262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering, online erschienen am 21.12.2025. Verfasst von Raman Kumar und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) has revolutionized modern production by enabling the fabrication of intricate and precise geometries. Despite these advantages, secondary finishing processes like micromilling are often required to meet stringent surface quality and dimensional accuracy demands. This research focuses on evaluating the role of minimum quantity lubrication (MQL) in optimizing tool performance and surface finish during the micromilling of Inconel 690, a nickel‐based superalloy valued for its superior mechanical strength and corrosion resistance. Comparative cutting experiments were conducted under three cooling strategies: dry machining, MQL, and conventional flood cooling. Tool wear and surface integrity were assessed using scanning electron microscopy (SEM) and 3D surface profilometry. Furthermore, a comprehensive sustainability analysis was performed using the Pugh matrix, considering economic, environmental, and technical aspects. Findings reveal that MQL effectively minimizes tool wear and improves surface quality while providing a more sustainable and efficient alternative to traditional flood cooling methods. The Pugh matrix analysis further confirms MQL as the most sustainable option, balancing cost, efficiency, and environmental impact. These findings contribute to the advancement of sustainable machining strategies for AM components, promoting improved performance and cost efficiency in industrial applications.

Zitieren

APA

Kumar, R., Prakash, K., Mann, V. S., Rao, A. C. U., Pattanaik, A., Ojha, M. K., Jacob, A., Sarangi, H., & Abate, L. (2025). Sustainable Micromachining of Additively Manufactured Nickel Alloy: Effect of Biodegradable MQL on Tool Wear and Surface Quality. Journal of Engineering, 2025(1). https://doi.org/10.1155/je/7252262

Vancouver

Kumar R, Prakash K, Mann VS, Rao ACU, Pattanaik A, Ojha MK, et al. Sustainable Micromachining of Additively Manufactured Nickel Alloy: Effect of Biodegradable MQL on Tool Wear and Surface Quality. Journal of Engineering. 2025;2025(1). doi:10.1155/je/7252262

BibTeX
@article{Kumar2025,
  author = {Kumar, Raman and Prakash, K. and Mann, Vikasdeep Singh and Rao, A. C. Umamaheshwer and Pattanaik, Ashutosh and Ojha, Manoj Kumar and Jacob, Ashwin and Sarangi, Hrushikesh and Abate, Lema},
  title = {Sustainable Micromachining of Additively Manufactured Nickel Alloy: Effect of Biodegradable MQL on Tool Wear and Surface Quality},
  journal = {Journal of Engineering},
  year = {2025},
  volume = {2025},
  number = {1},
  doi = {10.1155/je/7252262}
}
Kostenlos starten →