EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation of Trihybrid Nanofluid Flow in Different Tube Geometries for Enhanced Thermal Management

Saiful Islam, Md. Mahbubur Rahman, Orpan Taluckder Uthsha, Sultan Shaharea, Md. Shah Najmus Shakib, M. Monjurul Ehsan, Raza Moshwan, Sreelakshmi Kata

Journal of Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/je/4815377 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering, online erschienen am 14.11.2026. Verfasst von Saiful Islam und 7 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient thermal management is essential for high‐performance electronic and energy systems. This study numerically investigates the thermal‐hydraulic performance of Al 2 O 3 –Cu–MWCNT/water–ethylene glycol (60:40) trihybrid nanofluid (THNF) in smooth, internally finned, and externally finned pipes. Computational fluid dynamics (CFD) simulations were performed at Reynolds numbers of 8000–16,000 and nanoparticle volume fractions of 1%–3%, under a uniform heat flux of 8957 W/m 2 . The study systematically evaluates the combined effects of nanoparticle concentration and fin arrangement under identical operating conditions. At Re = 16,000, the internally finned pipe achieved heat transfer enhancements of 14.58% for water–EG (60:40) and 12.34% for 3% THNF compared with the smooth pipe. Increasing nanoparticle concentration improved the heat transfer coefficient, reaching a maximum of 5458.55 W/m 2 ·K for 3% THNF in the internally finned pipe at Re = 16,000. However, increased frictional resistance reduced its overall thermal‐hydraulic efficiency. The externally finned pipe with water–EG achieved the highest performance evaluation criterion (PEC), with a maximum improvement of 3.38% at Re = 16,000, compared with 2.08% for 3% THNF at Re = 16,000. Thus, the externally finned pipe with water–EG provides the best thermal‐hydraulic balance among the investigated configurations.

Zitieren

APA

Islam, S., Rahman, M. M., Uthsha, O. T., Shaharea, S., Shakib, M. S. N., Ehsan, M. M., Moshwan, R., & Kata, S. (2026). Numerical Investigation of Trihybrid Nanofluid Flow in Different Tube Geometries for Enhanced Thermal Management. Journal of Engineering, 2026(1). https://doi.org/10.1155/je/4815377

Vancouver

Islam S, Rahman MM, Uthsha OT, Shaharea S, Shakib MSN, Ehsan MM, et al. Numerical Investigation of Trihybrid Nanofluid Flow in Different Tube Geometries for Enhanced Thermal Management. Journal of Engineering. 2026;2026(1). doi:10.1155/je/4815377

BibTeX
@article{Islam2026,
  author = {Islam, Saiful and Rahman, Md. Mahbubur and Uthsha, Orpan Taluckder and Shaharea, Sultan and Shakib, Md. Shah Najmus and Ehsan, M. Monjurul and Moshwan, Raza and Kata, Sreelakshmi},
  title = {Numerical Investigation of Trihybrid Nanofluid Flow in Different Tube Geometries for Enhanced Thermal Management},
  journal = {Journal of Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/je/4815377}
}
Kostenlos starten →