Biomimetics in Helmet Design: A Review of Aerodynamic Perspectives
Journal of Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/je/3149327 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering, online erschienen am 25.04.2026. Verfasst von Mahadi Hasan Masud und 7 weiteren Autor:innen. Die Arbeit nennt 117 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Recent advancements in helmet design demonstrate that mimicking natural models can enhance both aerodynamics and safety protection. Thus, this paper comprehensively reviews the bio‐inspired helmet designs reported in the latest computational and experimental studies, in addition to discussing the biomimetic approaches that integrate aerodynamic optimization with performance. The key aerodynamic characteristics include surface texture, vent layout, wake behavior, and flow separation. The safety factors discussed are energy absorption, material toughness, and impact dispersion. It has been demonstrated that certain designs offer outstanding performance compared to others. For instance, the Air Attack helmet showed the lowest drag coefficient by about 0.0328 at a pitch angle of 25°. The bio‐inspired configurations show an improvement in both aerodynamics and safety metrics: hedgehog‐spine‐based auxetic liners reduced Von Mises strain by about 41.5% and lowered traumatic brain injury (TBI) risk by 72.65%, beetle‐elytron structures reduced 65% of mass without compromising strength, and diatom‐patterned liners increased energy absorption up to 70% compared with honeycomb designs. With these integrations of aerodynamic and biomimetic approaches, this paper presents emerging opportunities for next‐generation helmets that utilize nature‐derived surfaces, hierarchical composites, and multifunctional materials to provide lighter, safer, and more efficient protection.
Zitieren
APA
Masud, M. H., Debnath, S., Hossen, M. N., Qasem, N. A. A., Alam, M. M., Saimoon, N. Z., Salehin, M. N., & Ahmed, M. M. (2026). Biomimetics in Helmet Design: A Review of Aerodynamic Perspectives. Journal of Engineering, 2026(1). https://doi.org/10.1155/je/3149327
Vancouver
Masud MH, Debnath S, Hossen MN, Qasem NAA, Alam MM, Saimoon NZ, et al. Biomimetics in Helmet Design: A Review of Aerodynamic Perspectives. Journal of Engineering. 2026;2026(1). doi:10.1155/je/3149327
BibTeX
@article{Masud2026,
author = {Masud, Mahadi Hasan and Debnath, Shuvra and Hossen, Md. Nazmul and Qasem, Naef A. A. and Alam, Md. Mahbub and Saimoon, Nayem Zaman and Salehin, Md. Nazmus and Ahmed, Mim Mashrur},
title = {Biomimetics in Helmet Design: A Review of Aerodynamic Perspectives},
journal = {Journal of Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/je/3149327}
}
EUVIMED