Influence of Material and Geometric Gradation on the Blast Response of Metallic Honeycomb Sandwich Structures: A Numerical Study
Journal of Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/je/3148327 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering, online erschienen am 02.06.2026. Verfasst von Md. Ashraful Islam und 4 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Lightweight and high‐strength structures are increasingly required to mitigate the effects of blast loading. This study presents a numerical investigation of the dynamic response of honeycomb sandwich panels with different material and geometric configurations using ABAQUS/Explicit with the CONWEP blast model. Four configurations are considered: a square core (Model‐1), a graded hexagonal stainless steel core (Model‐2), a graded hexagonal aluminum core (Model‐3), and a graded wall‐thickness hexagonal stainless steel core (Model‐4). The panels are subjected to 1, 2, and 3 kg TNT blast loads at a standoff distance of 100 mm. The results demonstrate that graded hexagonal configurations (Models 2–4) exhibit reduced deflection compared to the square‐core baseline, indicating improved blast resistance. Among the stainless steel configurations, Model‐2 shows approximately 15% lower maximum deflection than Model‐1 and improved performance over Model‐4. Model‐3 achieves the most efficient performance in terms of energy absorption, exhibiting approximately 34% higher energy absorption than Model‐2 along with favorable mass efficiency. In contrast, wall‐thickness grading alone (Model‐4) provides limited improvement in global blast resistance. Overall, the study highlights the combined influence of geometric grading and material selection on deformation behavior and energy dissipation. The findings provide practical design insights for optimizing lightweight sandwich structures in blast‐resistant aerospace, defense, and civil engineering applications.
Zitieren
APA
Islam, M. A., Hossain, S., Shanto, F. A., Hasib, M. A., & Rahman, M. M. (2026). Influence of Material and Geometric Gradation on the Blast Response of Metallic Honeycomb Sandwich Structures: A Numerical Study. Journal of Engineering, 2026(1). https://doi.org/10.1155/je/3148327
Vancouver
Islam MA, Hossain S, Shanto FA, Hasib MA, Rahman MM. Influence of Material and Geometric Gradation on the Blast Response of Metallic Honeycomb Sandwich Structures: A Numerical Study. Journal of Engineering. 2026;2026(1). doi:10.1155/je/3148327
BibTeX
@article{Islam2026,
author = {Islam, Md. Ashraful and Hossain, Sajjad and Shanto, Fahim Ahamed and Hasib, Md. Abdul and Rahman, Md. Mahbubur},
title = {Influence of Material and Geometric Gradation on the Blast Response of Metallic Honeycomb Sandwich Structures: A Numerical Study},
journal = {Journal of Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/je/3148327}
}
EUVIMED