EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CFD Assessment of Bioethanol Vapor Substitution in a Methane‐Air Gas Turbine Combustor Using Matched Thermal Performance

Nazmul Hasan Anik Chawdhury, Azmain Fayek, Jubayer Ahmed Sajid, Ivan Grgić

Journal of Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/je/2630226 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering, online erschienen am 13.11.2026. Verfasst von Nazmul Hasan Anik Chawdhury und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Growing concerns over fossil‐fuel security, price instability, and combustion‐related emissions increase interest in renewable oxygenated fuels for gas turbine applications. This study develops a three‐dimensional CFD framework to assess prevaporized bioethanol as a methane substitute in a can‐type gas turbine combustor. A 90° periodic sector is modeled to reduce computational cost while retaining the main flow, reaction‐zone, and outlet‐mixing characteristics. The methane‐air baseline at φ = 0.77 is compared at one operating point with a published CFD study (limited benchmark), producing a maximum temperature of 2340.179 K, outlet mass‐weighted temperature of 1812.317 K, outlet CO 2 mass fraction of 0.1001534, and corrected total pressure loss of 2.18%. Bioethanol vapor is then simulated over ϕ = 0.60 − 1.30 using temperature, species formation, oxygen consumption, residual fuel, and pressure‐loss metrics. The φ = 0.70 case gives the closest methane‐equivalent performance, with an outlet mass‐weighted temperature of 1796.395 K, 15.922 K or 0.88% below methane, and corrected pressure loss of 2.26%. It also produces higher CO 2 and lower H 2 O mass fractions than methane. At φ = 1.30, outlet temperature increases to 2024.271 K, whereas residual bioethanol reaches 0.04782872 and pressure loss rises to 2.82%. The results demonstrate that equivalence‐ratio tuning is essential for balancing thermal output, fuel utilization, and aerodynamic losses.

Förderung

  • European Commission

Zitieren

APA

Chawdhury, N. H. A., Fayek, A., Sajid, J. A., & Grgić, I. (2026). CFD Assessment of Bioethanol Vapor Substitution in a Methane‐Air Gas Turbine Combustor Using Matched Thermal Performance. Journal of Engineering, 2026(1). https://doi.org/10.1155/je/2630226

Vancouver

Chawdhury NHA, Fayek A, Sajid JA, Grgić I. CFD Assessment of Bioethanol Vapor Substitution in a Methane‐Air Gas Turbine Combustor Using Matched Thermal Performance. Journal of Engineering. 2026;2026(1). doi:10.1155/je/2630226

BibTeX
@article{Chawdhury2026,
  author = {Chawdhury, Nazmul Hasan Anik and Fayek, Azmain and Sajid, Jubayer Ahmed and Grgić, Ivan},
  title = {CFD Assessment of Bioethanol Vapor Substitution in a Methane‐Air Gas Turbine Combustor Using Matched Thermal Performance},
  journal = {Journal of Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/je/2630226}
}
Kostenlos starten →