Effect of the Structural Parameters on the Weight of a Two‐Stage Reduction Gearbox Used for Electric Vehicles
Journal of Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/je/1695104 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering, online erschienen am 21.08.2026. Verfasst von Thong Duc Hong und 5 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This work examines the influence of key structural parameters—the first‐stage gear ratio, the gear module, and the number of teeth on the driving gears—on the total gear weight of a two‐stage reduction gearbox for electric vehicles. An analytical model relating these parameters to the gear geometry, the contact and tooth‐root strength, and the resulting mass is first established and implemented in Microsoft Excel; analysis of variance is then applied to quantify the relative contribution of each factor. The results indicate that the gear‐ratio distribution has the greatest influence, accounting for 77.41% of the variation, with lower first‐stage ratios and higher second ‐stage ratios generally reducing gear weight. The number of teeth on the second‐stage driving gear has a greater effect (18.64%) than that on the first‐stage driving gear (2.95%), and the overall gear weight reduces as the number of teeth goes up. The gear module produces a complex yet minor net effect (0.03%), increasing or decreasing the gear weight depending on whether the configuration has fewer or more teeth. The lightest (minimal) configuration—a first‐stage gear ratio of 2.259, a module of 4 mm, and 27 teeth on both the first and second‐stage driving gears—weighs 5.15 kg, which is 42.66% lighter than the heaviest (maximum) configuration—a first‐stage gear ratio of 4, a module of 4 mm, and 17 teeth on both driving gears—weighing 8.98 kg. The work provides an innovative approach to multiparameter optimization for the design of lightweight two‐stage electric‐vehicle gearboxes.
Zitieren
APA
Hong, T. D., Bui, D. T., Tran, H. H., Pham, M. Q., Vu, T. V., & Nguyen, T. (2026). Effect of the Structural Parameters on the Weight of a Two‐Stage Reduction Gearbox Used for Electric Vehicles. Journal of Engineering, 2026(1). https://doi.org/10.1155/je/1695104
Vancouver
Hong TD, Bui DT, Tran HH, Pham MQ, Vu TV, Nguyen T. Effect of the Structural Parameters on the Weight of a Two‐Stage Reduction Gearbox Used for Electric Vehicles. Journal of Engineering. 2026;2026(1). doi:10.1155/je/1695104
BibTeX
@article{Hong2026,
author = {Hong, Thong Duc and Bui, Duc Tuan and Tran, Hao Hoan and Pham, Minh Quang and Vu, Thang Viet and Nguyen, Thanh-Truong},
title = {Effect of the Structural Parameters on the Weight of a Two‐Stage Reduction Gearbox Used for Electric Vehicles},
journal = {Journal of Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/je/1695104}
}
EUVIMED