Effect of Alkali Treatment on Cola lepidota Fibers for Potential Use as Reinforcement in Composite Applications
International Journal of Polymer Science · 2026-01 · 2026 (1)
DOI: 10.1155/ijps/9671407 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Polymer Science, online erschienen am 18.11.2026. Verfasst von Judide Nkenne Youmba und 7 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Natural lignocellulosic fibers are increasingly considered as sustainable alternatives to synthetic reinforcements in composite materials, but their hydrophilic character and noncellulosic constituents can limit fiber–matrix adhesion and mechanical performance. This study is aimed at investigating and optimizing the alkaline treatment of Cola lepidota (CL) fibers extracted from bark to improve their physicochemical characteristics and reinforcing potential for composite applications. Fibers were treated with sodium hydroxide (NaOH) using a D‐optimal experimental design involving concentration (0.5–5 wt%), temperature (80°C–105°C), and treatment time (1–3 h). Mechanical properties were evaluated using tensile tests, Weibull analysis, ANOVA (analysis of variance), and response modeling, and the selected fibers were further characterized chemically, physically, morphologically, thermally, and structurally. The treatment condition of 2.75 wt% NaOH at 92.5°C for 1 h (CLH) provided the most favorable balance between mechanical performance and reliability, with a tensile strength of 250.8 MPa, Young′s modulus of 13.4 GPa, and Weibull moduli of 3.18 and 3.21, respectively. Chemical analysis showed an increase in cellulose from 47.97% to 56.20% and a decrease in lignin from 23.39% to 18.80%. Water absorption and moisture content decreased from 216.60% to 154.16% and from 6.35% to 4.68%, respectively. SEM revealed a cleaner and more homogeneous surface, whereas crystallinity increased from 62.44% to 68.32%. Thermal analysis revealed a decrease in the temperature of maximum degradation from 368.82°C for raw CL to 352.15°C for CLH, indicating that the treatment did not improve thermal stability in the main degradation region. These results demonstrate that optimized alkaline treatment substantially modifies the physicochemical, thermal and mechanical characteristics of CL fibers. The findings provide a basis for selecting treated fibers for future composite development. However, the suitability of CLH fibers for specific matrix systems, including gypsum‐based matrices, requires further investigation through composite manufacturing, interfacial characterization, and mechanical testing of the resulting materials.
Zitieren
APA
Youmba, J. N., Noah, P. M. A., Obame, S. V., Mbang, J. P. E., Omgba, A. D. B., Obam, J. C., Ebanda, F. B., & Ateba, A. (2026). Effect of Alkali Treatment on Cola lepidota Fibers for Potential Use as Reinforcement in Composite Applications. International Journal of Polymer Science, 2026(1). https://doi.org/10.1155/ijps/9671407
Vancouver
Youmba JN, Noah PMA, Obame SV, Mbang JPE, Omgba ADB, Obam JC, et al. Effect of Alkali Treatment on Cola lepidota Fibers for Potential Use as Reinforcement in Composite Applications. International Journal of Polymer Science. 2026;2026(1). doi:10.1155/ijps/9671407
BibTeX
@article{Youmba2026,
author = {Youmba, Judide Nkenne and Noah, Pierre Marcel Anicet and Obame, Suzie Viviane and Mbang, Jonas Peequeur Essome and Omgba, Achille Désiré Betené and Obam, Julien Clerc and Ebanda, Fabien Betene and Ateba, Atangana},
title = {Effect of Alkali Treatment on Cola lepidota Fibers for Potential Use as Reinforcement in Composite Applications},
journal = {International Journal of Polymer Science},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/ijps/9671407}
}
EUVIMED