EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integrating Soft Waste Into Composite Yarn Manufacturing: A Multi‐Criteria Decision‐Making Approach

Ahsan Habib, Z. Figen Antmen, Osman Babaarslan

International Journal of Polymer Science · 2026-01 · 2026 (1)

DOI: 10.1155/ijps/2080505 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Polymer Science, online erschienen am 23.04.2026. Verfasst von Ahsan Habib und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The spinning industries negatively impact the environment by generating substantial process waste. Unlike previous studies that primarily focus on recycling textile waste, this study explores a sustainable practice by incorporating process waste (soft waste) into manufacturing techniques to produce composite yarn with different components, including virgin cotton, elastane (Lycra (R) ), and polybutylene terephthalate (PBT), using the modified spinning technique (ring). The article investigates the characteristics of yarns made from six various percentages of process waste (0% to 50%) and 100% cotton (virgin). The research examines the influence of process waste on composite yarn characteristics, and results demonstrate that increasing soft waste content from 0% to 50% leads to a significant increase in unevenness (from 12.05 to 14.03), IPI (from 47 to 163/km), and hairiness (from 7.02 to 7.89), while tensile strength decreases from 16.01 to 12.01 cN/tex and elongation decreases from 13.2% to 11.01%. At the same time, yarn production cost is reduced by approximately 21.4% when 50% soft waste is incorporated, confirming the economic feasibility of the proposed approach. Pearson correlation (statistical analysis) confirms an important relationship (correlation) between process waste percentage and yarn properties. Moreover, the study utilizes the MOORA (Multi‐objective optimization based on ratio analysis) method as a judgment tool to find the perfect yarn based on properties, cost, and waste generation. The study establishes a validated, industry‐compatible, and scalable route for valorizing spinning soft waste into high‐value composite yarns, contributing to circular textile manufacturing and supporting Sustainable Development Goal 12 on responsible consumption and production.

Zitieren

APA

Habib, A., Antmen, Z. F., & Babaarslan, O. (2026). Integrating Soft Waste Into Composite Yarn Manufacturing: A Multi‐Criteria Decision‐Making Approach. International Journal of Polymer Science, 2026(1). https://doi.org/10.1155/ijps/2080505

Vancouver

Habib A, Antmen ZF, Babaarslan O. Integrating Soft Waste Into Composite Yarn Manufacturing: A Multi‐Criteria Decision‐Making Approach. International Journal of Polymer Science. 2026;2026(1). doi:10.1155/ijps/2080505

BibTeX
@article{Habib2026,
  author = {Habib, Ahsan and Antmen, Z. Figen and Babaarslan, Osman},
  title = {Integrating Soft Waste Into Composite Yarn Manufacturing: A Multi‐Criteria Decision‐Making Approach},
  journal = {International Journal of Polymer Science},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/ijps/2080505}
}
Kostenlos starten →