EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Undersized Drilling and Sequential Osseodensification on Primary Implant Stability in Simulated Bone Types III and IV: An In Vitro Study

Silvio Yoshiaki Okagawa iD, Alex Sandro de Souza, Paulo Sérgio Perri de Carvalho iD, Antonio Scarano iD, Bruno Freitas Mello, Sergio Rexhep Tari, Gustavo Coura, Gustavo Vicentis Oliveira Fernandes iD, Sergio Alexandre Gehrke iD

International Journal of Dentistry · 2026-01 · 2026 (1)

DOI: 10.1155/ijod/8114317 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Dentistry, online erschienen am 19.08.2026. Verfasst von Silvio Yoshiaki Okagawa und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Implant Dentistry, SLMANDIC - Sao Leopoldo Mandic, Campinas 13045-755, Brazil, slmandic.edu.br. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Primary implant stability is a key factor for successful osseointegration and may be influenced by osteotomy preparation techniques, particularly in low‐density bone. Thus, this study compared undersized drilling (UD), UD combined with osseodensification, and sequential osseodensification protocols with varying degrees of undersizing in simulated bone types III and IV with respect to implant stability. Additionally, the relationships between insertion torque (IT), removal torque (RT), and implant stability quotient (ISQ) were analyzed. Materials and Methods Eighty implants (4.0 × 11 mm) were placed in polyurethane blocks simulating type III and IV bone with a cortical layer. Four osteotomy protocols were tested: UD, UD plus osseodensification (OD1), and sequential osseodensification with −0.5 mm (OD2) and −0.7 mm (OD3) undersizing. Primary stability was assessed using IT, RT, and ISQ measurements. Data were analyzed using two‐way ANOVA, Pearson correlation, and multiple regression analysis ( α = 0.05).

Results

OD2 and OD3 produced higher IT values in both bone types compared with UD and OD1. In type III bone, OD3 showed the highest RT values, while in type IV bone, OD2 and OD3 were significantly higher than UD and OD1. ISQ values were higher for osseodensification protocols in type III bone, whereas no significant differences were observed in type IV bone. A strong correlation was found between IT and RT ( r = 0.746), whereas ISQ showed weaker associations with torque.

Conclusion

The use of sequential osseodensification protocols yielded superior mechanical stability parameters, specifically in IT and RT, in synthetic (polyurethane) bone models. However, improvements in ISQ were predominantly noted in the denser type III model. Importantly, because the tested protocols involved different drill designs and underpreparation dimensions, these enhancements reflect the success of the overall surgical strategy rather than the isolated effect of osseous densification.

Schlagwörter

Stichwörter der Autor:innen

implant stabilitylow-density boneosseodensificationpolyurethane modeltorqueundersized drilling

Autor:innen und Institutionen

  • Department of Implant Dentistry, SLMANDIC - Sao Leopoldo Mandic, Campinas 13045-755, Brazil, slmandic.edu.br.
  • Department of Innovative Technologies in Medicine & Dentistry, University of Chieti-Pescara, Chieti 66013, Italy, unich.it.
  • Department of Pharmaceutical Science, School of Health Sciences, Vale do Itajai University (UNIVALI), Itajai 88302-901, Brazil, univali.br.
  • Department of Implantology, Be Dental School, Vale do Itajai University (UNIVALI), São Jose 88102-700, Brazil, univali.br.
  • Department of Implantology, Bioface/Catolica de Murcia University, Montevideo 11100, Uruguay.
  • Missouri School of Dentistry and Oral Health, A.T. Still University, St. Louis 63104, Missouri, USA, atsu.edu.

ORCID-Profile: Silvio Yoshiaki Okagawa, Paulo Sérgio Perri de Carvalho, Antonio Scarano, Gustavo Vicentis Oliveira Fernandes, Sergio Alexandre Gehrke

Zitieren

APA

Okagawa, S. Y., de Souza, A. S., de Carvalho, P. S. P., Scarano, A., Mello, B. F., Tari, S. R., Coura, G., Fernandes, G. V. O., & Gehrke, S. A. (2026). Effect of Undersized Drilling and Sequential Osseodensification on Primary Implant Stability in Simulated Bone Types III and IV: An In Vitro Study. International Journal of Dentistry, 2026(1). https://doi.org/10.1155/ijod/8114317

Vancouver

Okagawa SY, de Souza AS, de Carvalho PSP, Scarano A, Mello BF, Tari SR, et al. Effect of Undersized Drilling and Sequential Osseodensification on Primary Implant Stability in Simulated Bone Types III and IV: An In Vitro Study. International Journal of Dentistry. 2026;2026(1). doi:10.1155/ijod/8114317

BibTeX
@article{Okagawa2026,
  author = {Okagawa, Silvio Yoshiaki and de Souza, Alex Sandro and de Carvalho, Paulo Sérgio Perri and Scarano, Antonio and Mello, Bruno Freitas and Tari, Sergio Rexhep and Coura, Gustavo and Fernandes, Gustavo Vicentis Oliveira and Gehrke, Sergio Alexandre},
  title = {Effect of Undersized Drilling and Sequential Osseodensification on Primary Implant Stability in Simulated Bone Types III and IV: An In Vitro Study},
  journal = {International Journal of Dentistry},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/ijod/8114317}
}
Kostenlos starten →