EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Poly(Alkenoic Acids) Molecular Weight on Microshear Bond Strength of Glass Ionomer Cement to Dentin

Faraz Khodakarami, Mohammad Atai iD, Zahra Shahidi, Fariba Motevasselian iD

International Journal of Dentistry · 2026-01 · 2026 (1)

DOI: 10.1155/ijod/5800346 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Dentistry, online erschienen am 08.05.2026. Verfasst von Faraz Khodakarami und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran, tums.ac.ir. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To assess the influence of poly(alkenoic acids) (PAA) molecular weight (MW) on the microshear bond strength (µSBS) of conventional glass ionomer cements (GICs) to dentin. Materials and Methods Twenty‐four third molars were sectioned mesiodistally to expose flat buccal halves and randomly divided into four main groups. Three PAA solutions were synthesized with different MWs: (i) high molecular weight (HMW: Mw = 46,300 Da), (ii) low molecular weight (LMW: Mw = 15,700 Da), and (iii) mixed molecular weight (MixMW: 1:1 mixture of HMW and LMW polymers). The PAA solutions were hand‐mixed with a commercial GIC restorative powder (Fuji II, GC Corp., Tokyo, Japan) at a powder‐to‐liquid ratio of 1.5:1 (wt/wt). Each tooth specimen received microcylinders at the mesiobuccal and distobuccal line angles from the four tested materials, including the control group and the experimental groups. µSBS was tested after subjecting the specimens to thermocycling (5000 cycles; 5–55°C) using a universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed using a one‐way ANOVA test ( p < 0.05). Failure modes were assessed using a stereomicroscope at 40× magnification.

Result

There was a significant difference between the groups. There was a significant difference between the groups. The mixture of PAA containing both HMW and LMW exhibited higher µSBS values compared with both the HMW group and the control group. Mixed failures were the most common, while adhesive failures occurred least frequently among the experimental groups.

Conclusion

The selected mixed ionomers of different MWs had a statistically significant effect on the µSBS of GIC to dentin.

Schlagwörter

Stichwörter der Autor:innen

bond strengthdentinglass ionomer cementmolecular weightspoly(alkenoic acids)

Autor:innen und Institutionen

  • School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran, tums.ac.ir.
  • Iran Polymer and Petrochemical Institute (IPPI), Tehran, Iran, ippi.ac.ir.
  • Department of Restorative Dentistry, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran, tums.ac.ir.

ORCID-Profile: Mohammad Atai, Fariba Motevasselian

Zitieren

APA

Khodakarami, F., Atai, M., Shahidi, Z., & Motevasselian, F. (2026). Effect of Poly(Alkenoic Acids) Molecular Weight on Microshear Bond Strength of Glass Ionomer Cement to Dentin. International Journal of Dentistry, 2026(1). https://doi.org/10.1155/ijod/5800346

Vancouver

Khodakarami F, Atai M, Shahidi Z, Motevasselian F. Effect of Poly(Alkenoic Acids) Molecular Weight on Microshear Bond Strength of Glass Ionomer Cement to Dentin. International Journal of Dentistry. 2026;2026(1). doi:10.1155/ijod/5800346

BibTeX
@article{Khodakarami2026,
  author = {Khodakarami, Faraz and Atai, Mohammad and Shahidi, Zahra and Motevasselian, Fariba},
  title = {Effect of Poly(Alkenoic Acids) Molecular Weight on Microshear Bond Strength of Glass Ionomer Cement to Dentin},
  journal = {International Journal of Dentistry},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/ijod/5800346}
}
Kostenlos starten →