EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Assessment of Carboxymethyl Cellulose–Loaded Zinc Oxide Nanoparticles for Antibacterial Properties

Niaz Mahmud, Syed Ahmed Tasnim, Intekhab Islam, Maruf Hasan, Md. Shahinoor Islam

International Journal of Chemical Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/ijce/9373448 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Chemical Engineering, online erschienen am 19.03.2026. Verfasst von Niaz Mahmud und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zinc oxide (ZnO) nanoparticles (NPs) are widely investigated for their antibacterial potential, yet their clinical translation is often limited by poor selectivity and safety concerns. In this study, ZnO NPs were surface‐modified using carboxymethyl cellulose (CMC) to explore enhancements in antibacterial activity. The formation of the ZnO–CMC nanocomposite was confirmed through physical characterization techniques including Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray (EDX) analysis, and zeta potential measurements. The antibacterial efficacy of the CMC‐modified ZnO NPs was evaluated in vitro against Lactobacillus acidophilus and Lactobacillus bulgaricus . Compared to unmodified ZnO NPs, the CMC‐coated formulation exhibited increased antibacterial activity in a concentration‐dependent manner. At 0.5% (w/v), bacterial viability reduction improved from 51% to 66%, and at 1.5% (w/v), from 63% to 77%. At a lower concentration of 0.1% (w/v), both formulations showed negligible effects. These results suggest that surface modification with CMC can enhance the antibacterial performance of ZnO NPs, potentially broadening their applicability in antimicrobial formulations.

Zitieren

APA

Mahmud, N., Tasnim, S. A., Islam, I., Hasan, M., & Islam, M. S. (2026). Development and Assessment of Carboxymethyl Cellulose–Loaded Zinc Oxide Nanoparticles for Antibacterial Properties. International Journal of Chemical Engineering, 2026(1). https://doi.org/10.1155/ijce/9373448

Vancouver

Mahmud N, Tasnim SA, Islam I, Hasan M, Islam MS. Development and Assessment of Carboxymethyl Cellulose–Loaded Zinc Oxide Nanoparticles for Antibacterial Properties. International Journal of Chemical Engineering. 2026;2026(1). doi:10.1155/ijce/9373448

BibTeX
@article{Mahmud2026,
  author = {Mahmud, Niaz and Tasnim, Syed Ahmed and Islam, Intekhab and Hasan, Maruf and Islam, Md. Shahinoor},
  title = {Development and Assessment of Carboxymethyl Cellulose–Loaded Zinc Oxide Nanoparticles for Antibacterial Properties},
  journal = {International Journal of Chemical Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/ijce/9373448}
}
Kostenlos starten →