Assessment of the Reaction Kinetics for the Transesterification of Linseed Oil Catalyzed by Barium Chloride–Doped Clay
International Journal of Chemical Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/ijce/4143988 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Chemical Engineering, online erschienen am 27.06.2026. Verfasst von Nwosu-Obieogu Kenechi und 3 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A study of the reaction kinetics was performed for the transesterification of linseed oil (LSO) using a clay‐derived catalyst doped with barium chloride (CD‐BaCl). Various analytical techniques, including XRD, SEM, BET, XRF, and FTIR, were employed to evaluate the catalyst’s structural, surface, and chemical characteristics. The fatty acid methyl ester (FAME) profile of the resulting products was obtained via gas chromatography–mass spectrometry (GC–MS). Kinetic trials were conducted at three temperatures—40, 50, and 60°C—under fixed optimal parameters: a methanol‐to‐oil ratio of 10:1, 4°wt% catalyst, 300 rpm stirring speed, and a two‐hour reaction period. Two mechanistic models—Eley–Rideal (ER) and Langmuir–Hinshelwood–Hougen–Watson (LHHW)—were applied to interpret the kinetic data. The LHHW model provided the closest fit to the experimental results for the CD‐BaCl catalyst, yielding an R 2 value of 0.9428 and a residual variance of 6.32 × 10 −12 at 60°C. The rate‐controlling step was determined to be the surface interaction between adsorbed triglyceride molecules and adsorbed methanol. Raising the reaction temperature accelerated the process, suggesting an endothermic nature. The activation energy and pre‐exponential factor were calculated to be 9.07 kJ mol −1 and 3.36 h −1 , respectively, both below the boiling point of methanol. Model validation showed excellent consistency between predicted and observed values, supporting the reliability of the proposed kinetic framework. The novelty of this work lies in the synthesis and kinetic evaluation of a BaCl 2 ‐impregnated clay catalyst for LSO transesterification, which exhibited effective performance under mild conditions and an unusually low activation energy, indicating a diminished energy barrier and improved surface reactivity. The kinetic analysis confirms that the reaction follows the LHHW pathway with surface reaction as the limiting step, providing fresh mechanistic understanding of acidic clay‐based heterogeneous catalysts and demonstrating strong alignment between model predictions and experimental findings.
Zitieren
APA
Kenechi, N., Nonso, U. C., Okechukwu, O. D., & Joseph, E. (2026). Assessment of the Reaction Kinetics for the Transesterification of Linseed Oil Catalyzed by Barium Chloride–Doped Clay. International Journal of Chemical Engineering, 2026(1). https://doi.org/10.1155/ijce/4143988
Vancouver
Kenechi N, Nonso UC, Okechukwu OD, Joseph E. Assessment of the Reaction Kinetics for the Transesterification of Linseed Oil Catalyzed by Barium Chloride–Doped Clay. International Journal of Chemical Engineering. 2026;2026(1). doi:10.1155/ijce/4143988
BibTeX
@article{Kenechi2026,
author = {Kenechi, Nwosu-Obieogu and Nonso, Ude Callistus and Okechukwu, Onukwuli Dominic and Joseph, Ezeugo},
title = {Assessment of the Reaction Kinetics for the Transesterification of Linseed Oil Catalyzed by Barium Chloride–Doped Clay},
journal = {International Journal of Chemical Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/ijce/4143988}
}
EUVIMED