Design Recommendation and Site Implementation of High‐Voltage Double‐Y–Type Harmonic Filter Bank for Utility Substation: Real Industrial Site Experience
International Transactions on Electrical Energy Systems · 2026-01 · 2026 (1)
DOI: 10.1155/etep/2036924 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Transactions on Electrical Energy Systems, online erschienen am 06.11.2026. Verfasst von Ashish Chandra und 1 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research addresses power quality issues in a 132/33‐kV utility substation, specifically harmonic generation, low power factor, and poor voltage profile. To address these problems, a high‐voltage Y‐Y–type harmonic filter (HF) is proposed. This filter mitigates harmonics and improves power factors and voltage profile. Thorough analysis and simulation are conducted using ETAP, PSCAD, and Power Quality Analyzer software to ensure accuracy and reliability. The HF design phase accounts for the effects of transformer tapping and series reactor impedance on inrush current suppression. Load flow analysis is performed considering different transformer loading patterns. The resulting power factor and voltage profile waveforms are evaluated before and after the HF installation. The HF design aligns with the IEEE and IEC standards. In addition, this research introduces the concept of unbalanced current protection to enhance system stability and reliability. This comprehensive approach further strengthens the proposed HF as a holistic solution. To validate the effectiveness of the proposed solution, the implemented HF is deployed in a practical utility distribution substation. Real‐world field measurements confirm the effectiveness of the proposed solution, demonstrating its positive impact on power quality. Unlike previous studies that primarily rely on simulation, the proposed methodology is validated through practical implementation and field measurements at an operating 132/33‐kV utility substation, demonstrating its applicability under real network conditions.
Zitieren
APA
Chandra, A., & Singh, M. (2026). Design Recommendation and Site Implementation of High‐Voltage Double‐Y–Type Harmonic Filter Bank for Utility Substation: Real Industrial Site Experience. International Transactions on Electrical Energy Systems, 2026(1). https://doi.org/10.1155/etep/2036924
Vancouver
Chandra A, Singh M. Design Recommendation and Site Implementation of High‐Voltage Double‐Y–Type Harmonic Filter Bank for Utility Substation: Real Industrial Site Experience. International Transactions on Electrical Energy Systems. 2026;2026(1). doi:10.1155/etep/2036924
BibTeX
@article{Chandra2026,
author = {Chandra, Ashish and Singh, Mukhtiar},
title = {Design Recommendation and Site Implementation of High‐Voltage Double‐Y–Type Harmonic Filter Bank for Utility Substation: Real Industrial Site Experience},
journal = {International Transactions on Electrical Energy Systems},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/etep/2036924}
}
EUVIMED