EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance Evaluation and Optimization of Hybrid Battery Thermal Management System Integrated With Heat Pipe Under High Discharge Rates

Qingbin Wang, Hangang Yan, Yuxi Wang, Yun Yang, Xiaoguang Liu, Rongqin Huang, Gancai Huang, Zheng Huang

International Journal of Energy Research · 2026-01 · 2026 (1)

DOI: 10.1155/er/8852328 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 06.08.2026. Verfasst von Qingbin Wang und 7 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Southern Power Grid.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Effective heat dissipation is a critical factor influencing the performance, safety, and longevity of lithium‐ion batteries. To address the thermal challenges of battery modules, this study proposes a hybrid battery thermal management system (BTMS) incorporating flat heat pipes (FHPs), fins, and forced air convection. Four thermal management configurations including natural convection, single heat pipe cooling (HPC), heat pipe–air cooling without fins, and finned heat pipe–air cooling were evaluated through computational fluid dynamics (CFD) simulations. Moreover, key design parameters, including the number of fins, fin spacing, the number of heat pipes, and inlet airflow velocity, were systematically optimized. Results show that the finned heat pipe–air cooling system exhibited the most favorable thermal performance. Considering the balance between structural simplicity and thermal performance, the cooling system consisting of 10 fins, a 4 mm fin spacing, and 10 heat pipes achieved the optimal configuration, reducing the average battery temperature to 43.6°C with a maximum temperature difference of 4.3°C. Further analysis of airflow velocity revealed that maintaining the inlet velocity between 0.2 and 0.4 m/s under a 3C discharge condition effectively limited the average temperature and temperature gradient to below 45°C and 5°C, respectively, while keeping the power consumption under 1 W. These findings demonstrate that the proposed hybrid BTMS can achieve efficient thermal regulation and low energy consumption through coordinated structural and operational optimization, offering a practical and scalable solution for prismatic lithium‐ion battery modules.

Förderung

  • China Southern Power Grid

Zitieren

APA

Wang, Q., Yan, H., Wang, Y., Yang, Y., Liu, X., Huang, R., Huang, G., & Huang, Z. (2026). Performance Evaluation and Optimization of Hybrid Battery Thermal Management System Integrated With Heat Pipe Under High Discharge Rates. International Journal of Energy Research, 2026(1). https://doi.org/10.1155/er/8852328

Vancouver

Wang Q, Yan H, Wang Y, Yang Y, Liu X, Huang R, et al. Performance Evaluation and Optimization of Hybrid Battery Thermal Management System Integrated With Heat Pipe Under High Discharge Rates. International Journal of Energy Research. 2026;2026(1). doi:10.1155/er/8852328

BibTeX
@article{Wang2026,
  author = {Wang, Qingbin and Yan, Hangang and Wang, Yuxi and Yang, Yun and Liu, Xiaoguang and Huang, Rongqin and Huang, Gancai and Huang, Zheng},
  title = {Performance Evaluation and Optimization of Hybrid Battery Thermal Management System Integrated With Heat Pipe Under High Discharge Rates},
  journal = {International Journal of Energy Research},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/er/8852328}
}
Kostenlos starten →