Graphene‐SiO 2 ‐GaAs Metal‐Insulator‐Semiconductor Solar Cell Design With InGaP Back‐Surface Field and Optimized Antireflection Coating for Next‐Generation Photovoltaics
International Journal of Energy Research · 2026-01 · 2026 (1)
DOI: 10.1155/er/7182451 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 21.07.2026. Verfasst von Muhammad Johirul Islam und 2 weiteren Autor:innen. Die Arbeit nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In this work, the proposal suggests a metal‐insulator‐semiconductor (MIS) solar cell using a graphene‐SiO 2 ‐gallium arsenide (GaAs) structure that is far more effective than other graphene‐related devices of the same structure. It has been shown by simulation using the Atlas device simulator (Silvaco Inc.) that the optimized design provides a short‐circuit current density ( J SC = 48.39 mA/cm 2 ), open‐circuit voltage ( V OC = 0.651 V), and fill factor (FF = 72.71%), leading to a power conversion efficiency (PCE = 25.46%). Graphene is used as the transparent conducting oxide (TCO) because it has remarkable optical transparency, carrier mobility, and flexibility as compared to traditional TCOs like ITO, thus, allowing more light to penetrate and charge to be collected. The addition of the SiO 2 oxide layer is effective in reducing the dark saturation current to approximately the same level as with conventional p–n junctions, and the addition of an indium gallium phosphide (InGaP) back‐surface field (BSF) layer reduces recombination caused by lattice mismatch at the rear interface, thus improving voltage stability and carrier collection. In addition, an optimized antireflection coating (ARC) can also reduce optical reflections by a significant amount, allowing further increases in external quantum efficiency (EQE). A combination of these design measures makes the proposed MIS solar cell a high‐performance photovoltaic (PV) device with the highest reported efficiency so far in this architecture and an excellent demonstration of the potential of this architecture in next‐generation solar energy applications.
Zitieren
APA
Islam, M. J., Hasan, M. M., & Chowdhury, M. I. B. (2026). Graphene‐SiO 2 ‐GaAs Metal‐Insulator‐Semiconductor Solar Cell Design With InGaP Back‐Surface Field and Optimized Antireflection Coating for Next‐Generation Photovoltaics. International Journal of Energy Research, 2026(1). https://doi.org/10.1155/er/7182451
Vancouver
Islam MJ, Hasan MM, Chowdhury MIB. Graphene‐SiO 2 ‐GaAs Metal‐Insulator‐Semiconductor Solar Cell Design With InGaP Back‐Surface Field and Optimized Antireflection Coating for Next‐Generation Photovoltaics. International Journal of Energy Research. 2026;2026(1). doi:10.1155/er/7182451
BibTeX
@article{Islam2026,
author = {Islam, Muhammad Johirul and Hasan, Md. Mehedi and Chowdhury, Md. Iqbal Bahar},
title = {Graphene‐SiO 2 ‐GaAs Metal‐Insulator‐Semiconductor Solar Cell Design With InGaP Back‐Surface Field and Optimized Antireflection Coating for Next‐Generation Photovoltaics},
journal = {International Journal of Energy Research},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/er/7182451}
}
EUVIMED