EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prospective Life Cycle Assessment of Large‐Scale Low Temperature Water Electrolysis Plants

Janis Gerhardt-Mörsdorf, Sebastian Braukhoff, Andreas Lindermeir, Christine Minke

International Journal of Energy Research · 2026-01 · 2026 (1)

DOI: 10.1155/er/6811103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 09.07.2026. Verfasst von Janis Gerhardt-Mörsdorf und 3 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Niedersächsisches Ministerium für Wissenschaft und Kultur.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To support the hydrogen economy’s goal of reducing environmental pressures through renewable energy integration, environmental shepherding during scale‐up is essential. While traditional life cycle assessment (LCA) models upscale small plants, this study focuses on the differing engineering of large‐scale, gigawatt‐range water electrolysis plants in a distinct bottom‐up prospective LCA (pLCA) model. It presents a comparative cradle‐to‐grave pLCA of 1 GW alkaline water electrolysis (AWE) and proton exchange membrane water electrolysis (PEMWE) plants, projecting technological advancements up to 2050 under explorative middle‐of‐the‐road background scenarios. Key performance indicators (KPIs) for both technologies were identified via comprehensive literature review and integrated into electrochemical process models for current (state‐of‐the‐art [SoA]) and future plants in 2030 and 2050, incorporating optimistic and pessimistic performance scenarios. Mass and energy balances combined with construction KPIs enabled material demand estimation for all system components. End‐of‐life was considered using a cut‐off approach. The predictive foreground model was implemented in Brightway2 and linked with four background scenarios generated by premise v.2.2.6. Environmental impacts were assessed using the Environmental Footprint 3.1 method. Results show significant reductions in global warming potential (GWP) for both AWE and PEMWE by 2050, accompanied by increased abiotic depletion potential of elements (ADPe), with AWE slightly outperforming PEMWE in both categories. Impacts were highly sensitive to background climate policies: stringent policies reduce GWP but increase ADPe. Enhanced plant performance cannot compensate for weak climate policies regarding GWP. Compared to conventional hydrogen production, electrolytic hydrogen from renewables exhibits much lower GWP. Construction impacts mainly derived from electrolyzer stacks, differing fundamentally between technologies, with AWE having higher initial impacts. Future impacts from the construction phase will decline significantly and will still be dominated by power electronics. Pursuing strict climate policies and incorporating circularity and recycling are critical for minimizing environmental impacts. On the condition of complying with the planetary save and just operating space, technology choice should prioritize cost and operational flexibility.

Förderung

  • Niedersächsisches Ministerium für Wissenschaft und Kultur

Zitieren

APA

Gerhardt-Mörsdorf, J., Braukhoff, S., Lindermeir, A., & Minke, C. (2026). Prospective Life Cycle Assessment of Large‐Scale Low Temperature Water Electrolysis Plants. International Journal of Energy Research, 2026(1). https://doi.org/10.1155/er/6811103

Vancouver

Gerhardt-Mörsdorf J, Braukhoff S, Lindermeir A, Minke C. Prospective Life Cycle Assessment of Large‐Scale Low Temperature Water Electrolysis Plants. International Journal of Energy Research. 2026;2026(1). doi:10.1155/er/6811103

BibTeX
@article{GerhardtMrsdorf2026,
  author = {Gerhardt-Mörsdorf, Janis and Braukhoff, Sebastian and Lindermeir, Andreas and Minke, Christine},
  title = {Prospective Life Cycle Assessment of Large‐Scale Low Temperature Water Electrolysis Plants},
  journal = {International Journal of Energy Research},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/er/6811103}
}
Kostenlos starten →