EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Solid Composite Polymer Electrolyte Lithium‐Ion Battery With an Improved Electrochemical Stability Window and Cycle Characteristics

Yesul Jeong, Yunju Choi, Mirang Byeon, Sang Geul Lee, Dokyung Kim, Sunghee Min, Young Joo Lee, Jong-Seong Bae, Euh Duck Jeong, Jong-Pil Kim

International Journal of Energy Research · 2026-01 · 2026 (1)

DOI: 10.1155/er/6684073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 09.04.2026. Verfasst von Yesul Jeong und 9 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Basic Science Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer electrolytes for lithium‐ion batteries (LIBs) face challenges such as low ionic conductivity, insufficient mechanical flexibility, and limited thermal stability, which restrict their use in high‐energy density applications. To address these issues, a solid composite polymer electrolyte (SCPE) is developed by blending poly(ethylene oxide) (PEO) with poly(ethylene glycol) dimethyl ether (PEGDME) as a synthetic electrolyte and adding an F‐doped lithium aluminum titanium phosphate inorganic filler. As a result, the prepared CPE exhibits a high ionic conductivity of 1.24 × 10 −4 S/cm and excellent thermal stability, along with an extended electrochemical stability window (ESW) up to 6.8 V. When applied to LiFePO 4 half‐cells, the CPE enables charge and discharge capacities of 152.3 and 152.0 mA h/g, respectively, while maintaining a low voltage hysteresis of approximately 0.16 V throughout the cycles. Although the initial cycle shows a relatively high irreversible capacity of 3.7 mA h/g, the cell demonstrates outstanding cycling stability, retaining 98.9% of its initial capacity after 100 cycles. The developed composite electrolyte shows potential for use in safe and high‐performance all‐solid‐state LIBs, providing a viable pathway toward safer and high‐performance solid‐state LIBs suitable for advanced energy storage applications.

Förderung

  • Korea Basic Science Institute

Zitieren

APA

Jeong, Y., Choi, Y., Byeon, M., Lee, S. G., Kim, D., Min, S., Lee, Y. J., Bae, J., Jeong, E. D., & Kim, J. (2026). Solid Composite Polymer Electrolyte Lithium‐Ion Battery With an Improved Electrochemical Stability Window and Cycle Characteristics. International Journal of Energy Research, 2026(1). https://doi.org/10.1155/er/6684073

Vancouver

Jeong Y, Choi Y, Byeon M, Lee SG, Kim D, Min S, et al. Solid Composite Polymer Electrolyte Lithium‐Ion Battery With an Improved Electrochemical Stability Window and Cycle Characteristics. International Journal of Energy Research. 2026;2026(1). doi:10.1155/er/6684073

BibTeX
@article{Jeong2026,
  author = {Jeong, Yesul and Choi, Yunju and Byeon, Mirang and Lee, Sang Geul and Kim, Dokyung and Min, Sunghee and Lee, Young Joo and Bae, Jong-Seong and Jeong, Euh Duck and Kim, Jong-Pil},
  title = {Solid Composite Polymer Electrolyte Lithium‐Ion Battery With an Improved Electrochemical Stability Window and Cycle Characteristics},
  journal = {International Journal of Energy Research},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/er/6684073}
}
Kostenlos starten →