Design and Experimental Analysis of Heat‐Pipe‐Integrated Heat Exchanger for Heat Pipe Nuclear Microreactor
International Journal of Energy Research · 2025-01 · 2025 (1)
DOI: 10.1155/er/6681985 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 22.12.2025. Verfasst von Yongnam Lee und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy.
Abstract (Originalsprache)
With the advantages of high inherent safety, simple design, and small volume, the heat pipe reactor (HPR) is considered one of the nuclear power systems suitable for the distributed electricity generation market. The HPR transfers heat generated from the reactor core through heat pipes to an intermediate heat exchanger (IHX) connected to power conversion system (PCS). In this paper, a new concept of a diffusion‐bonded compact IHX for HPR application is developed, offering high compactness and structural integrity. The heat transfer performance was experimentally analyzed. To evaluate the novel IHX under actual operating conditions, the expected PCS parameters were calculated based on a high‐efficiency supercritical CO 2 Brayton cycle. The IHX consists of two different types of plates: heat pipe plates which accommodate the heat pipes, and cooling channel plates, through which high‐pressure CO 2 flows. Experimental measurements were conducted to determine the thermal contact resistance (TCR) and overall heat transfer coefficient of the IHX. Corresponding models were developed using relevant parameters and evaluated analytically. The IHX volume under expected PCS conditions was assessed using the developed correlation. Results show a 39.6% reduction in volume compared to a conventional shell & tube‐type heat exchanger, which is expected to broaden the engineering applications of compact heat exchanger systems.
Förderung
- Ministry of Trade, Industry and Energy
Zitieren
APA
Lee, Y., Lee, S. W., & Jo, H. (2025). Design and Experimental Analysis of Heat‐Pipe‐Integrated Heat Exchanger for Heat Pipe Nuclear Microreactor. International Journal of Energy Research, 2025(1). https://doi.org/10.1155/er/6681985
Vancouver
Lee Y, Lee SW, Jo H. Design and Experimental Analysis of Heat‐Pipe‐Integrated Heat Exchanger for Heat Pipe Nuclear Microreactor. International Journal of Energy Research. 2025;2025(1). doi:10.1155/er/6681985
BibTeX
@article{Lee2025,
author = {Lee, Yongnam and Lee, Su Won and Jo, HangJin},
title = {Design and Experimental Analysis of Heat‐Pipe‐Integrated Heat Exchanger for Heat Pipe Nuclear Microreactor},
journal = {International Journal of Energy Research},
year = {2025},
volume = {2025},
number = {1},
doi = {10.1155/er/6681985}
}
EUVIMED