EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Anode Surface Engineering for Tunable Carbon Nanotube Growth via Integrated Carbon Capture and Conversion in Low‐Cost Molten Carbonates

I Ketut Rai Asmara Dipta, Chan Woo Lee

International Journal of Energy Research · 2026-01 · 2026 (1)

DOI: 10.1155/er/4730702 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 15.05.2026. Verfasst von I Ketut Rai Asmara Dipta und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, ICT and Future Planning, Ministry of Science and ICT, South Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The electrochemical conversion of CO 2 into carbon nanotubes (CNTs) using molten salt electrolysis is a promising route for carbon capture and utilization, yet the role of anode surface chemistry in governing CNT growth remains poorly understood. Herein, we demonstrate that controlled acid pretreatment of Inconel 718 anodes provides an effective surface engineering strategy to regulate metal dissolution behavior and control CNT formation. By systematically varying the HCl concentration for acid pretreatment, we show that partial removal of the passivation layer and the generation of localized surface pits enrich Ni and Fe metals at the near‐surface layer. Combined XPS, SEM‐EDS, and electrochemical analyses demonstrate that moderate acid treatment (6–8 M HCl) induces a regulated release of catalytically active Fe and Ni species, resulting in the formation of multi‐walled CNTs with tunable outer diameters down to 18.7 ± 4.1 nm and a maximum Faradaic efficiency (FE) of 93.6% in a low‐cost eutectic molten salt composed of Li 2 CO 3 –Na 2 CO 3 –K 2 CO 3 –KF (30.5:22.1:17.5:30.0 mol%) at 500°C. This work highlights the critical role of anode surface engineering in the conversion of captured carbonate within molten carbonate electrolytes and provides a simple and effective strategy to enable rational control of CNT growth behavior.

Förderung

  • Ministry of Science, ICT and Future Planning
  • Ministry of Science and ICT, South Korea

Zitieren

APA

Dipta, I. K. R. A., & Lee, C. W. (2026). Anode Surface Engineering for Tunable Carbon Nanotube Growth via Integrated Carbon Capture and Conversion in Low‐Cost Molten Carbonates. International Journal of Energy Research, 2026(1). https://doi.org/10.1155/er/4730702

Vancouver

Dipta IKRA, Lee CW. Anode Surface Engineering for Tunable Carbon Nanotube Growth via Integrated Carbon Capture and Conversion in Low‐Cost Molten Carbonates. International Journal of Energy Research. 2026;2026(1). doi:10.1155/er/4730702

BibTeX
@article{Dipta2026,
  author = {Dipta, I Ketut Rai Asmara and Lee, Chan Woo},
  title = {Anode Surface Engineering for Tunable Carbon Nanotube Growth via Integrated Carbon Capture and Conversion in Low‐Cost Molten Carbonates},
  journal = {International Journal of Energy Research},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/er/4730702}
}
Kostenlos starten →