CO 2 ‐Assisted Catalytic Co‐Pyrolysis of Sewage Sludge and Mixed Plastics in a Fluidized Bed Reactor
International Journal of Energy Research · 2026-01 · 2026 (1)
DOI: 10.1155/er/4110070 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 05.03.2026. Verfasst von Guan-Bang Chen und 1 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Sewage sludge (SS) and waste plastics are abundant waste streams that require effective treatment. Co‐pyrolysis is a promising option that can alleviate disposal burdens while converting these wastes into value‐added, renewable energy products. This study investigated the catalytic co‐pyrolysis of SS, polyethylene (PE), and polypropylene (PP) in a 1 kWth bubbling fluidized bed reactor using an HZSM‐5 catalyst. A carrier gas mixture of nitrogen and carbon dioxide was also employed, which has rarely been explored in previous co‐pyrolysis studies. Thermogravimetric analysis (TGA) revealed distinct thermal behaviors under N 2 and CO 2 , with SS showing three weight loss stages (100–150°C, 300–550°C, and >600°C). Activation‐energy analysis indicated that co‐pyrolysis reduced the activation energy with increases in the plastic content (from 283.37 kJ/mol for SS to 214.67–217.06 kJ/mol for the SS–plastic blends under N 2 ), thereby improving the reaction efficiency. Using the L 16 orthogonal array (OA), optimized parameters for maximum pyrolysis oil yield were determined as 450°C, a 20% plastic blending ratio (PBR), a plastic mixture of 70% PE and 30% PP, 10% HZSM‐5, and a carrier gas of 30% CO 2 and 70% N 2 , yielding 18.01% oil. The addition of a 10% catalyst reduced the content of oxygenated compounds by 20.85% and increased that of hydrocarbons by nearly tenfold. For aviation fuel, the optimal conditions (450°C, 60% PBR, 70% PE and 30% PP mixture, 15% HZSM‐5, and a carrier gas of 30% CO 2 and 70% N 2 yielded 5.7% fuel on an ash‐free basis, with 26.46% of hydrocarbons in the aviation‐fuel range. The maximum exergy efficiency, considering all products, reached 72.38%.
Zitieren
APA
Chen, G., & Chen, C. (2026). CO 2 ‐Assisted Catalytic Co‐Pyrolysis of Sewage Sludge and Mixed Plastics in a Fluidized Bed Reactor. International Journal of Energy Research, 2026(1). https://doi.org/10.1155/er/4110070
Vancouver
Chen G, Chen C. CO 2 ‐Assisted Catalytic Co‐Pyrolysis of Sewage Sludge and Mixed Plastics in a Fluidized Bed Reactor. International Journal of Energy Research. 2026;2026(1). doi:10.1155/er/4110070
BibTeX
@article{Chen2026,
author = {Chen, Guan-Bang and Chen, Chun-Teng},
title = {CO 2 ‐Assisted Catalytic Co‐Pyrolysis of Sewage Sludge and Mixed Plastics in a Fluidized Bed Reactor},
journal = {International Journal of Energy Research},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/er/4110070}
}
EUVIMED