Efficient Hydrogen Production From NaBH 4 Hydrolysis Using Cobalt‐Supported CuAl‐Layered Double Hydroxide Catalysts
International Journal of Energy Research · 2026-01 · 2026 (1)
DOI: 10.1155/er/3723733 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 09.11.2026. Verfasst von Atieh Ranjbar und 1 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The development of efficient, nonprecious‐metal catalysts for on‐demand hydrogen generation via sodium borohydride (NaBH 4 ) hydrolysis is crucial for advancing hydrogen storage technologies. This study presents the design, synthesis, and application of cobalt nanoparticles supported on copper–aluminum layered double hydroxides (xCo/CuAl‐LDHy) as novel catalysts for this reaction. Catalysts were synthesized via an ion‐exchange method followed by reduction, varying the Cu:Al molar ratio (1:1, 2:1, and 3:1) and cobalt loading (10–40 wt%). The Cu:Al molar ratio markedly affected the catalytic performance, with a 2:1 ratio yielding the most favorable LDH structure. The corresponding 20Co/LDH2 catalyst exhibited a BET surface area of 73.6 m 2 g −1 and showed superior catalytic performance. TEM revealed the characteristic layered nanosheet morphology of the CuAl‐LDH support in the 20Co/LDH2 catalyst, with well‐dispersed cobalt nanoparticles (5–10 nm) and localized cobalt‐rich aggregates (20–50 nm). Increasing cobalt loading from 10% to 40% enhanced hydrogen generation rate (HGR) on LDH2 support (Cu:Al = 2:1), although this enhancement became less notable at loadings higher than 30%. The reusability tests over three cycles revealed that the 20 wt% Co catalyst exhibited the best balance between initial activity and stability, with a total activity loss of ~15.5%, outperforming higher‐loaded counterparts. Furthermore, response surface methodology (RSM) was employed to optimize the reaction parameters, including catalyst dosage, temperature, and NaBH 4 and NaOH concentrations. The experimentally verified optimum condition, selected based on the RSM prediction, was obtained at 44.836°C, using 8.087 mg of catalyst, 8.728 wt% NaBH 4 , and 4.752 wt% NaOH, resulting in a maximum experimentally confirmed average HGR of 7100 mL g cat −1 min −1 . The apparent activation energy was determined to be 59.86 kJ mol −1 from the Arrhenius plot over 30–45°C. This study established Cu:Al = 2:1 LDH as an effective, tunable support for constructing robust, nonnoble metal catalysts for efficient hydrogen production.
Zitieren
APA
Ranjbar, A., & Mosayebi, A. (2026). Efficient Hydrogen Production From NaBH 4 Hydrolysis Using Cobalt‐Supported CuAl‐Layered Double Hydroxide Catalysts. International Journal of Energy Research, 2026(1). https://doi.org/10.1155/er/3723733
Vancouver
Ranjbar A, Mosayebi A. Efficient Hydrogen Production From NaBH 4 Hydrolysis Using Cobalt‐Supported CuAl‐Layered Double Hydroxide Catalysts. International Journal of Energy Research. 2026;2026(1). doi:10.1155/er/3723733
BibTeX
@article{Ranjbar2026,
author = {Ranjbar, Atieh and Mosayebi, Amir},
title = {Efficient Hydrogen Production From NaBH 4 Hydrolysis Using Cobalt‐Supported CuAl‐Layered Double Hydroxide Catalysts},
journal = {International Journal of Energy Research},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/er/3723733}
}
EUVIMED