Polyurethane‐Derived Quasi‐Solid Polymer Electrolyte for Li Metal Batteries
International Journal of Energy Research · 2026-01 · 2026 (1)
DOI: 10.1155/er/2413282 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Energy Research, online erschienen am 11.07.2026. Verfasst von Chi Keung Song und 12 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Education - Kingdom of Saudi Arabia, Ministry of Science, ICT and Future Planning.
Abstract (Originalsprache)
Lithium metal batteries (LMBs) have high energy density but face challenges from dendrite formation and unstable solid electrolyte interphase (SEI) layers, which limit their cycle life. Gel polymer electrolytes (GPEs) help address these issues by improving mechanical strength, forming stable SEI layers, and enhancing ion dissociation, though their structure can limit ion conductivity. To overcome this, we developed quasi‐solid GPEs (qPEs) by incorporating a small fraction of liquid electrolyte (LE) into polyurethanes (PUs) with distinct hard segments, such as PUs with linear hexamethylene diisocyanate (PU‐HD) and PUs with bulky isophorone diisocyanate (PU‐ID). The PU‐ID structure results in higher ionic conductivity, a greater Li‐ion transference number, and lower interfacial resistance, as shown by Li||Li symmetric cell tests, which also revealed more stable and longer cycling performance (2500 h at 1 mA cm −2 ). XPS analysis found that PU‐ID forms a LiF‐rich SEI layer on the electrode surface, which helps suppress dendrite growth and enhances long‐term battery stability with NCM 622 cathodes (82% capacity retention after 300 cycles at 0.5 C). These improvements highlight that modifying the polymer structure, especially with PU‐ID, significantly boosts battery efficiency, cycle life, and electrode protection.
Förderung
- National Research Foundation of Korea
- Ministry of Education - Kingdom of Saudi Arabia
- Ministry of Science, ICT and Future Planning
Zitieren
APA
Song, C. K., Hwang, J., Jeon, S., Lee, D. Y., Bhalani, D. V., Lee, G., Cho, Y., Won, D., Choi, S., Lee, K., Hwang, D., Lim, B., & Song, W. (2026). Polyurethane‐Derived Quasi‐Solid Polymer Electrolyte for Li Metal Batteries. International Journal of Energy Research, 2026(1). https://doi.org/10.1155/er/2413282
Vancouver
Song CK, Hwang J, Jeon S, Lee DY, Bhalani DV, Lee G, et al. Polyurethane‐Derived Quasi‐Solid Polymer Electrolyte for Li Metal Batteries. International Journal of Energy Research. 2026;2026(1). doi:10.1155/er/2413282
BibTeX
@article{Song2026,
author = {Song, Chi Keung and Hwang, Jongha and Jeon, Seungju and Lee, Dong Yeob and Bhalani, Dixit V. and Lee, Gunoh and Cho, Yanghyun and Won, Doyeon and Choi, Suo and Lee, Kyung-Jin and Hwang, Do-Hoon and Lim, Bogyu and Song, Woo-Jin},
title = {Polyurethane‐Derived Quasi‐Solid Polymer Electrolyte for Li Metal Batteries},
journal = {International Journal of Energy Research},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/er/2413282}
}
EUVIMED