Fabrication of a Multilayer Brain Phantom With Embedded Voltage Sensors for Transcranial Electrical Stimulation
Advances in Materials Science and Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/amse/8860375 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Materials Science and Engineering, online erschienen am 25.04.2026. Verfasst von Kajal Chandraprakash Jain und 6 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents fabrication of a multilayered, sensor‐integrated brain phantom for validating electric field distributions induced by transcranial electrical stimulation (TES), with an emphasis on long‐term stability and measurement accuracy. The phantom comprises five tissue‐mimicking layers—scalp, skull, cerebrospinal fluid, gray matter, and white matter—each fabricated by doping silicone (polydimethylsiloxane or PDMS) with varying concentrations of multiwalled carbon nanotubes to replicate isotropic electrical conductivity. Embedded sensors at the interfaces enable localized voltage measurements throughout the volume of heterogeneous phantom, without the need for external support structures. Commercial TES electrodes are applied to the scalp layer to replicate stimulation conditions. Interlayer voltage ratios showed a strong agreement between finite element simulation and experiment, with deviations ranging from 0.26% to 10%, indicating preservation of the overall average voltage attenuation across the fabricated tissue‐mimicking layers. Intralayer spatial analysis demonstrated low‐to‐moderate spatial correlation across sensor arrays (Pearson’s r = 0.04–0.58), suggesting that while global voltage attenuation is preserved, accurate modeling of sensor–TMM and TMM–TMM boundary interactions is essential to reproduce local spatial voltage distributions. Together, these findings demonstrate the phantom’s capability for controlled, layer‐specific evaluation of TES‐induced voltage distributions and highlight the importance of detailed geometric and boundary modeling for reliable electric field estimation.
Zitieren
APA
Jain, K. C., Goldschmidtboeing, F., Hügel, P., Srivastava, R., Dümpelmann, M., Woias, P., & Comella, L. M. (2026). Fabrication of a Multilayer Brain Phantom With Embedded Voltage Sensors for Transcranial Electrical Stimulation. Advances in Materials Science and Engineering, 2026(1). https://doi.org/10.1155/amse/8860375
Vancouver
Jain KC, Goldschmidtboeing F, Hügel P, Srivastava R, Dümpelmann M, Woias P, et al. Fabrication of a Multilayer Brain Phantom With Embedded Voltage Sensors for Transcranial Electrical Stimulation. Advances in Materials Science and Engineering. 2026;2026(1). doi:10.1155/amse/8860375
BibTeX
@article{Jain2026,
author = {Jain, Kajal Chandraprakash and Goldschmidtboeing, Frank and Hügel, Peter and Srivastava, Richa and Dümpelmann, Matthias and Woias, Peter and Comella, Laura Maria},
title = {Fabrication of a Multilayer Brain Phantom With Embedded Voltage Sensors for Transcranial Electrical Stimulation},
journal = {Advances in Materials Science and Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/amse/8860375}
}
EUVIMED