EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of Corrosion Resistance of Anodized Aluminum Alloys of 1100, 5083‐O, and 6063 Types

Shaswato Barua, Md. Arafat Rahman, H. M. A. R. Maruf, Konok Chandra Bhowmik, Md. Muktadir Billah

Advances in Materials Science and Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/amse/8271185 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Materials Science and Engineering, online erschienen am 16.07.2026. Verfasst von Shaswato Barua und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The corrosion resistance of Al alloys is significant for their use in marine, structural, and transportation applications where long‐term durability in chloride‐rich environments is required. This study investigates the anodic oxide film formation and corrosion behavior of representative aluminum alloys of 1100, 5083‐O, and 6063 types, after being anodized in an electrolyte of 0.89M (NH 4 ) 2 SO 4 and 0.54M NH 4 F, with and without 5 wt% ethylene glycol (EG). Anodizing was conducted for 1 and 3 h, followed by dichromate sealing. Optical microscopy exhibited that EG suppresses fluoride‐induced localized dissolution, producing smoother and more compact porous films, whereas non‐EG electrolytes promoted pore merging, particularly in Mg‐rich alloys. Potentiodynamic polarization and EIS revealed alloy‐ and time‐dependent corrosion responses. AA1100 exhibited superior barrier properties with EG‐assisted anodizing at short durations, while the long‐term stability is governed by the imposed anodization conditions. AA5083‐O demonstrated enhanced corrosion resistance without EG, attributed to aggressive fluoride etching and effective sealing. It is noted that EG improved early stage corrosion resistance, whereas prolonged immersion favored non‐EG coatings due to stabilization by corrosion products for AA6063. Hardness measurements indicated postcorrosion strengthening from in situ formation of boehmite and hydrated alumina. Hence, optimized corrosion performance depends on anodizing chemistry, alloy composition, and treatment duration.

Zitieren

APA

Barua, S., Rahman, M. A., Maruf, H. M. A. R., Bhowmik, K. C., & Billah, M. M. (2026). Experimental Investigation of Corrosion Resistance of Anodized Aluminum Alloys of 1100, 5083‐O, and 6063 Types. Advances in Materials Science and Engineering, 2026(1). https://doi.org/10.1155/amse/8271185

Vancouver

Barua S, Rahman MA, Maruf HMAR, Bhowmik KC, Billah MM. Experimental Investigation of Corrosion Resistance of Anodized Aluminum Alloys of 1100, 5083‐O, and 6063 Types. Advances in Materials Science and Engineering. 2026;2026(1). doi:10.1155/amse/8271185

BibTeX
@article{Barua2026,
  author = {Barua, Shaswato and Rahman, Md. Arafat and Maruf, H. M. A. R. and Bhowmik, Konok Chandra and Billah, Md. Muktadir},
  title = {Experimental Investigation of Corrosion Resistance of Anodized Aluminum Alloys of 1100, 5083‐O, and 6063 Types},
  journal = {Advances in Materials Science and Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/amse/8271185}
}
Kostenlos starten →