EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improvement of the Thermophysical Characteristics of Polymer Composites Designed to Protect Water Transport

Oleksandr Sapronov, Andriy Buketov, Pavlo Maruschak, Serhii Zinchenko, Olga Syzonenko, Anna Sapronova, Serhii Yakushchenko, Kostyantyn Klevtsov, Oleksandr Sharko, Roman Zolotyy, Oleksandr Holotenko, Dmytro Nahovskyi

Advances in Materials Science and Engineering · 2025-01 · 2025 (1)

DOI: 10.1155/amse/7349228 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Materials Science and Engineering, online erschienen am 06.09.2025. Verfasst von Oleksandr Sapronov und 11 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The thermophysical properties of polymeric materials filled with the refractory compounds titanium carbide (TiC) and ferrite (Fe 3 C) were studied using thermogravimetric and differential thermal analysis. These techniques allow structural transformations in modern materials to be assessed. Composites containing an active additive at a concentration of q = 0.100 wt% exhibit the lowest relative mass loss ( ε m = 65.3%), due to the formation of a significant number of bonds between the polymer components and redistribution of thermal energy within the polymer volume. Comprehensive studies of the thermal stability parameters ( T i , T f i n , T max , and T 0 ) established the course of physicochemical processes during the thermal degradation of filled composites. The activation energy increased by 1.2 times. The thermal stability of the developed polymers containing 0.100 wt% particles of the synthesized iron/TiC mixture increases from 587 K to 612 K. The rational introduction of the filler into the polymer matrix increases the stiffness of the segments and the main chain due to the presence of TiC (20%) and Fe 3 C (5%), which are formed after high‐voltage electric discharge (HVED) synthesis. The active particles of refractory compounds serve as centers for the formation of an additional spatial polymer network, ensuring the redistribution of thermal energy within the polymer volume. It has been proven that the key parameter affecting the permissible temperature range of the developed polymers is the initial exoeffect temperature (Ti), which is 485.4 K.

Zitieren

APA

Sapronov, O., Buketov, A., Maruschak, P., Zinchenko, S., Syzonenko, O., Sapronova, A., Yakushchenko, S., Klevtsov, K., Sharko, O., Zolotyy, R., Holotenko, O., & Nahovskyi, D. (2025). Improvement of the Thermophysical Characteristics of Polymer Composites Designed to Protect Water Transport. Advances in Materials Science and Engineering, 2025(1). https://doi.org/10.1155/amse/7349228

Vancouver

Sapronov O, Buketov A, Maruschak P, Zinchenko S, Syzonenko O, Sapronova A, et al. Improvement of the Thermophysical Characteristics of Polymer Composites Designed to Protect Water Transport. Advances in Materials Science and Engineering. 2025;2025(1). doi:10.1155/amse/7349228

BibTeX
@article{Sapronov2025,
  author = {Sapronov, Oleksandr and Buketov, Andriy and Maruschak, Pavlo and Zinchenko, Serhii and Syzonenko, Olga and Sapronova, Anna and Yakushchenko, Serhii and Klevtsov, Kostyantyn and Sharko, Oleksandr and Zolotyy, Roman and Holotenko, Oleksandr and Nahovskyi, Dmytro},
  title = {Improvement of the Thermophysical Characteristics of Polymer Composites Designed to Protect Water Transport},
  journal = {Advances in Materials Science and Engineering},
  year = {2025},
  volume = {2025},
  number = {1},
  doi = {10.1155/amse/7349228}
}
Kostenlos starten →