Interface Pressure‐Friction Mechanics of Neonatal Mattress‐Textile Combinations
Advances in Materials Science and Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/amse/7140516 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Materials Science and Engineering, online erschienen am 21.05.2026. Verfasst von Tino A. Jucker und 2 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In neonatal and infant care, the contact of skin with mattress and textile covers is particularly critical for preventing soft tissue damage due to their fragile skin. Textile covers can modify biomechanical load transfer by jointly affecting compression and shear at the skin interface. This study quantified body weight‐dependent interface pressure and friction for four clinically relevant textiles combined with a foam and an air mattress and integrated both into a unified mechanical risk index. The risk index revealed clear configuration‐dependent differences that were not captured by pressure or friction alone. Specifically, the foam mattress, combined with a moisture‐absorbent nonwoven cover, which is the current clinical standard, produced the highest risk. In contrast, the air mattress combined with a low‐friction textile yielded the lowest risk at lower weights, while the spacer fabric yielded the lowest risk at higher body weights of infants. Low‐risk configurations were associated with preserved envelopment and internal shear absorption within compliant three‐dimensional textile structures, whereas thin, low‐deformability covers promoted elevated combined loading. The findings provide a comparative mechanical framework for evaluating mattress‐textile cover combinations within the tested range of body weights and controlled conditions. This framework enables the identification of mechanically optimal configurations and supports improved care for neonates and infants.
Zitieren
APA
Jucker, T. A., Annaheim, S., & Rossi, R. M. (2026). Interface Pressure‐Friction Mechanics of Neonatal Mattress‐Textile Combinations. Advances in Materials Science and Engineering, 2026(1). https://doi.org/10.1155/amse/7140516
Vancouver
Jucker TA, Annaheim S, Rossi RM. Interface Pressure‐Friction Mechanics of Neonatal Mattress‐Textile Combinations. Advances in Materials Science and Engineering. 2026;2026(1). doi:10.1155/amse/7140516
BibTeX
@article{Jucker2026,
author = {Jucker, Tino A. and Annaheim, Simon and Rossi, René M.},
title = {Interface Pressure‐Friction Mechanics of Neonatal Mattress‐Textile Combinations},
journal = {Advances in Materials Science and Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/amse/7140516}
}
EUVIMED