EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Static Load Test of Steel‐Tube and Foam Aluminum Composite Plates

Guojiao Yang, Zhenghao Zou, Fang Chen

Advances in Materials Science and Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/amse/3842247 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Materials Science and Engineering, online erschienen am 16.11.2026. Verfasst von Guojiao Yang und 2 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, the capacity of steel‐tube composite plates with three different cross‐sectional forms and foam‐aluminum composite plates with three different cross‐sectional forms was studied through static load tests. In steel‐tube composite plates, the load‐flexural capacity increases with the number of steel tubes. For every additional steel tube, the load‐flexural capacity of the composite plate increases by approximately 16%. And in foam aluminum composite plates without side plates, the load‐flexural capacity increases with the increase in foam aluminum thickness. For every 10‐mm increase in foam aluminum thickness, the load‐flexural capacity of the composite plate increases by approximately 12%.

Zitieren

APA

Yang, G., Zou, Z., & Chen, F. (2026). Research on Static Load Test of Steel‐Tube and Foam Aluminum Composite Plates. Advances in Materials Science and Engineering, 2026(1). https://doi.org/10.1155/amse/3842247

Vancouver

Yang G, Zou Z, Chen F. Research on Static Load Test of Steel‐Tube and Foam Aluminum Composite Plates. Advances in Materials Science and Engineering. 2026;2026(1). doi:10.1155/amse/3842247

BibTeX
@article{Yang2026,
  author = {Yang, Guojiao and Zou, Zhenghao and Chen, Fang},
  title = {Research on Static Load Test of Steel‐Tube and Foam Aluminum Composite Plates},
  journal = {Advances in Materials Science and Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/amse/3842247}
}
Kostenlos starten →