Application of Computational Thermodynamics to Determine Slag Properties and Their Influence on Steel Desulfurization
Advances in Materials Science and Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/amse/3422301 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Materials Science and Engineering, online erschienen am 20.11.2026. Verfasst von Mateus Costa Corona und 5 weiteren Autor:innen. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior.
Abstract (Originalsprache)
Sulfur pick‐up in steel during converter operations, caused by the addition of certain raw materials, requires subsequent desulfurization in the ladle to achieve sulfur levels below 0.0050%. This study employs computational thermodynamics to evaluate the properties of slags formed after steel tapping and their relationship with desulfurization efficiency. Steel and slag samples were collected from industrial heats at the ArcelorMittal Tubarão steel plant after 5 minutes of ladle treatment. The chemical composition of the steel was analyzed to determine sulfur content and process efficiency. Slag composition was used to calculate key properties, including CaO content, phase fractions, Al 2 O 3 , SiO 2 , and viscosity, using Thermocalc and FactSage software. Correlations between these properties and desulfurization efficiency were established. The results indicate that optimal desulfurization is achieved with slags containing adequate solid CaO while maintaining liquid phase saturation. CaO activity (aCaO) was identified as the most influential parameter. Based on these findings, a new steel desulfurization factor is proposed to estimate process efficiency. Additionally, multivariate regression analysis demonstrated that aCaO has the greatest impact on desulfurization efficiency, particularly in slags not saturated with CaO.
Förderung
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Zitieren
APA
Corona, M. C., Falleiros, H. A., Junca, E., Grillo, F. F., Amaral, T. B. D. S., & Oliveira, J. R. D. (2026). Application of Computational Thermodynamics to Determine Slag Properties and Their Influence on Steel Desulfurization. Advances in Materials Science and Engineering, 2026(1). https://doi.org/10.1155/amse/3422301
Vancouver
Corona MC, Falleiros HA, Junca E, Grillo FF, Amaral TBDS, Oliveira JRD. Application of Computational Thermodynamics to Determine Slag Properties and Their Influence on Steel Desulfurization. Advances in Materials Science and Engineering. 2026;2026(1). doi:10.1155/amse/3422301
BibTeX
@article{Corona2026,
author = {Corona, Mateus Costa and Falleiros, Hans Albuquerque and Junca, Eduardo and Grillo, Felipe Fardin and Amaral, Thiago Barreto da Silva and Oliveira, José Roberto de},
title = {Application of Computational Thermodynamics to Determine Slag Properties and Their Influence on Steel Desulfurization},
journal = {Advances in Materials Science and Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/amse/3422301}
}
EUVIMED