Carbon‐Based Material–Reinforced MMC Processed by Powder Metallurgy: A Review of Fabrication Challenges and Property Enhancements
Advances in Materials Science and Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/amse/2176816 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Materials Science and Engineering, online erschienen am 18.08.2026. Verfasst von Wasif Abu Dujana und 2 weiteren Autor:innen. Die Arbeit nennt 326 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A promising method for creating lightweight, strong, and multipurpose materials for cutting‐edge engineering applications is the reinforcement of carbon‐based materials into metal matrix composites (MMCs). This review provides a thorough overview of carbon‐based reinforcements, including carbon nanotubes (CNTs), graphene, graphene oxide, and graphite, integrated into four metallic matrices such as aluminum, magnesium, copper, and titanium using powder metallurgy. These four matrices were selected due to their extensive research coverage and superior potential for structural, thermal, tribological, and biomedical applications. The review primarily covers studies published between 2020 and 2026, supplemented by key earlier works for highlighting the evolution of fabrication techniques, properties, and performance. The effects of carbon nanostructures on the microstructure and properties are critically analyzed. Improved strength and hardness are reported for aluminum matrices. Homogeneous dispersion is limited by the low wettability and oxidation of Mg‐based MMCs. Despite issues such as carbide production and interfacial incompatibility, titanium systems exhibit notable gains in both thermal stability and mechanical strength. Copper matrices show superior electrical and thermal conductivity upon carbon addition. The review emphasizes reinforcement integrity and uniform dispersion during processing. Important research gaps and future directions are finally outlined, with an emphasis on improving interfacial bonding, managing reaction kinetics, and creating innovative hybrid reinforcement techniques.
Zitieren
APA
Dujana, W. A., Rahman, M. A., & Hasan, M. S. (2026). Carbon‐Based Material–Reinforced MMC Processed by Powder Metallurgy: A Review of Fabrication Challenges and Property Enhancements. Advances in Materials Science and Engineering, 2026(1). https://doi.org/10.1155/amse/2176816
Vancouver
Dujana WA, Rahman MA, Hasan MS. Carbon‐Based Material–Reinforced MMC Processed by Powder Metallurgy: A Review of Fabrication Challenges and Property Enhancements. Advances in Materials Science and Engineering. 2026;2026(1). doi:10.1155/amse/2176816
BibTeX
@article{Dujana2026,
author = {Dujana, Wasif Abu and Rahman, Md. Arafat and Hasan, Md. Saif},
title = {Carbon‐Based Material–Reinforced MMC Processed by Powder Metallurgy: A Review of Fabrication Challenges and Property Enhancements},
journal = {Advances in Materials Science and Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/amse/2176816}
}
EUVIMED