Basic Characterization of an Industrial Elastomeric O‐Ring for Petrochemical Sealing Using Accessible Laboratory Techniques
Advances in Polymer Technology · 2026-01 · 2026 (1)
DOI: 10.1155/adv/8270302 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Polymer Technology, online erschienen am 22.06.2026. Verfasst von Soheila Lashgari und 5 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Rubber O‐rings are vital sealing components in petrochemical and refinery applications, where reliable performance under harsh conditions is essential. This study employs a multianalytical approach to investigate the material composition, curing system, and performance of an industrial O‐ring. Fourier transform infrared (FTIR) spectroscopy identified characteristic bands at 1394 cm −1 , confirming the O‐ring as a fluorocarbon elastomer (FKM), with a peak at 3428 cm −1 (attributed to N–H groups) diminishing post‐Soxhlet extraction, indicating an amine‐based curing system. Thermogravimetric analysis (TGA) revealed a 91.69% weight loss up to 700°C, with significant degradation at 493°C (58.37% loss between 400 and 550°C) and a residual mass of 8.31%, suggesting minimal filler content. Mechanical testing demonstrated a modulus of 4.60 MPa, tensile strength of 5.86 MPa, strain at break of 165%, and a compression set of 41%, reflecting robust material properties. The O‐ring was identified as Viton A (a vinylidene fluoride [VDF]/hexafluoropropylene [HFP] copolymer) with a diamine curing system, typical of early FKM grades used in demanding chemical environments. While FTIR identifies key functional groups, its integration with TGA (for thermal stability and filler content), Soxhlet extraction (for additive isolation), and mechanical testing provides a practical, accessible framework for reverse engineering industrial elastomers—offering actionable insights into material suitability for petrochemical sealing applications.
Zitieren
APA
Lashgari, S., Mousavi, S. O., Ghadami, A., Haghi, D., Lashgari, S., & Hajebi, S. (2026). Basic Characterization of an Industrial Elastomeric O‐Ring for Petrochemical Sealing Using Accessible Laboratory Techniques. Advances in Polymer Technology, 2026(1). https://doi.org/10.1155/adv/8270302
Vancouver
Lashgari S, Mousavi SO, Ghadami A, Haghi D, Lashgari S, Hajebi S. Basic Characterization of an Industrial Elastomeric O‐Ring for Petrochemical Sealing Using Accessible Laboratory Techniques. Advances in Polymer Technology. 2026;2026(1). doi:10.1155/adv/8270302
BibTeX
@article{Lashgari2026,
author = {Lashgari, Soheila and Mousavi, Seyed Omidreza and Ghadami, Azam and Haghi, Daryoush and Lashgari, Somayeh and Hajebi, Sakineh},
title = {Basic Characterization of an Industrial Elastomeric O‐Ring for Petrochemical Sealing Using Accessible Laboratory Techniques},
journal = {Advances in Polymer Technology},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/adv/8270302}
}
EUVIMED