The Effect of Lignin and Deep Eutectic Solvent (Propionic Acid/Urea) on Carboxymethylcellulose/Pectin Films for Potential Food Packaging Applications
Advances in Polymer Technology · 2026-01 · 2026 (1)
DOI: 10.1155/adv/5917068 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Polymer Technology, online erschienen am 21.08.2026. Verfasst von Ndidiamaka L. Oseafiana und 3 weiteren Autor:innen. Die Arbeit nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
The on‐going environmental burden of petroleum‐based plastics has led to increased research into sustainable and biodegradable alternatives for food packaging film applications. Lignin is an abundant byproduct of the paper and pulping industry and a promising reinforcement material for biopolymer films. This is due to its rigid, hydrophobic and antioxidant‐rich structure which has been associated with enhanced mechanical film properties and thermal stability; however, its poor solubility in water is an issue. This study explores, for the first time, the incorporation of kraft lignin into a renewable biocomposite film of pectin and carboxymethylcellulose (CMC) by incorporating lignin into a deep eutectic solvent (DES) consisting of propionic acid (PA) and urea (U) (2:1 molar ratio) to enhance its dispersion within the polymer matrix. Three sets of films were prepared and analyzed for tensile strength, elongation at break, water vapor permeability (WVP), film composition, surface morphology, and thermal properties. The first set of films compared CMC/pectin with varying amounts of DES. The second set of films used a mixture design of experiments (DoEs) to explore varying film compositions with CMC, pectin, and lignin as variables with a fixed DES loading. The third set of films evaluated one promising composite film formulation in detail by comparing it to similar formulations without lignin or lignin/DES. The formulation exhibiting the most favorable combination of physicochemical properties within the studied range consisted of 1.5 g DES and a combined biopolymer loading of 2 g (with a CMC/pectin/lignin loading ratio of 1.213 g/0.737 g/0.05 g) in 100 mL water. In general, the DES acted as a plasticizer while lignin exhibited a plasticizing effect at low loadings. This research aligns with circular economy principles as it utilizes biomolecules that can be derived from waste materials. It presents a promising low‐cost approach for incorporating lignin into biopolymer films, with potential for future application in food packaging.
Förderung
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Oseafiana, N. L., Scott, A. J., Frampton, J. P., & Brooks, M. S. (2026). The Effect of Lignin and Deep Eutectic Solvent (Propionic Acid/Urea) on Carboxymethylcellulose/Pectin Films for Potential Food Packaging Applications. Advances in Polymer Technology, 2026(1). https://doi.org/10.1155/adv/5917068
Vancouver
Oseafiana NL, Scott AJ, Frampton JP, Brooks MS. The Effect of Lignin and Deep Eutectic Solvent (Propionic Acid/Urea) on Carboxymethylcellulose/Pectin Films for Potential Food Packaging Applications. Advances in Polymer Technology. 2026;2026(1). doi:10.1155/adv/5917068
BibTeX
@article{Oseafiana2026,
author = {Oseafiana, Ndidiamaka L. and Scott, Alison J. and Frampton, John P. and Brooks, Marianne Su-Ling},
title = {The Effect of Lignin and Deep Eutectic Solvent (Propionic Acid/Urea) on Carboxymethylcellulose/Pectin Films for Potential Food Packaging Applications},
journal = {Advances in Polymer Technology},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/adv/5917068}
}
EUVIMED