Enhancement of 3D Printed Polymeric Auxetic Metamaterials Through Curved‐Member Unit Cells: Numerical Evaluation of Poisson’s Ratio and Experimental Evaluation of Tensile Strength and Impact Resistance
Advances in Polymer Technology · 2026-01 · 2026 (1)
DOI: 10.1155/adv/5889103 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Polymer Technology, online erschienen am 20.11.2026. Verfasst von Kiumars Mohammady Aghdam und 2 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study proposes a systematic modification of a conventional auxetic architecture by replacing selected straight members with curved members while retaining the overall topology and fundamental deformation mechanism. Three configurations, A1, A2, and A3, containing one, two, and three curved members, respectively, were investigated. Poisson’s ratio was evaluated numerically using finite element analysis, whereas tensile strength and Charpy impact resistance were experimentally evaluated using fused filament fabrication (FFF)–manufactured polylactic acid (PLA) specimens. All proposed configurations maintained a negative Poisson’s ratio throughout the investigated tensile displacement range. Among the proposed designs, A2 exhibited the most stable auxetic response, with an 11.8% reduction in the negative Poisson’s ratio magnitude compared with 15.5% for the conventional reentrant architecture. The tensile strength increased by 75.3%, 79.0%, and 129.4% for A1, A2, and A3, respectively, with A3 achieving the highest value of 1737.3 kPa. Impact resistance increased by 210.4%, 323.2%, and 115.8%, respectively, with A2 achieving the highest value of 4822.5 J/m 2 . These results demonstrate that curved‐member modification can tailor the balance among auxetic stability, tensile strength, and impact resistance within the investigated configurations.
Zitieren
APA
Aghdam, K. M., Azdast, T., & Hasanzadeh, R. (2026). Enhancement of 3D Printed Polymeric Auxetic Metamaterials Through Curved‐Member Unit Cells: Numerical Evaluation of Poisson’s Ratio and Experimental Evaluation of Tensile Strength and Impact Resistance. Advances in Polymer Technology, 2026(1). https://doi.org/10.1155/adv/5889103
Vancouver
Aghdam KM, Azdast T, Hasanzadeh R. Enhancement of 3D Printed Polymeric Auxetic Metamaterials Through Curved‐Member Unit Cells: Numerical Evaluation of Poisson’s Ratio and Experimental Evaluation of Tensile Strength and Impact Resistance. Advances in Polymer Technology. 2026;2026(1). doi:10.1155/adv/5889103
BibTeX
@article{Aghdam2026,
author = {Aghdam, Kiumars Mohammady and Azdast, Taher and Hasanzadeh, Rezgar},
title = {Enhancement of 3D Printed Polymeric Auxetic Metamaterials Through Curved‐Member Unit Cells: Numerical Evaluation of Poisson’s Ratio and Experimental Evaluation of Tensile Strength and Impact Resistance},
journal = {Advances in Polymer Technology},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/adv/5889103}
}
EUVIMED