EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Deformation and Load‐Carrying Capacity of Cone‐Shaped Tensegrity Membranes Under Snow Loads: An Inelastic‐Membrane Analysis

Somayeh Talebi, Hadi Sarmasti, Karim Abedi, Behzad Shekasteband

Advances in Civil Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/adce/8930931 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 23.07.2026. Verfasst von Somayeh Talebi und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cone‐shaped membrane‐tensegrity structures are a new system in covering big spans and are usually analyzed as an elastic structure in research and design. This assumption is a simplifying method because of the complexity of membrane materials and its consideration in an analysis. To address this gap, this study examines the stability of cone‐shaped membrane‐tensegrity structures under snow loads in which inelastic membrane behavior was considered. In this regard, a user‐defined material (UMAT) in ABAQUS captures the membrane’s inelastic response, enabling a more accurate assessment of load‐carrying capacity, deformation, and failure modes under both symmetric and asymmetric snow loading. A parametric study across six configurations evaluates how tensegrity geometry, loading pattern, and material nonlinearity influence stability. Results demonstrate that incorporating inelastic membrane behavior alters the dominant failure mechanism and the critical load, highlighting the necessity of realistic membrane modeling to predict performance and ensure robust design against snow‐induced instability. Notably, rupture‐capable membranes with top‐inclined cables can increase load‐carrying capacity by up to 58% relative to elastic‐membrane models, indicating a shift from membrane rupture to strut buckling as the prevailing failure mode in these cases. Conversely, models lacking top cables and modeled with elastic membranes may overestimate capacity by as much as 44% under symmetric loading and 36% under asymmetric loading, underscoring the risk of no conservative designs when membrane ductility and damage evolution are neglected.

Zitieren

APA

Talebi, S., Sarmasti, H., Abedi, K., & Shekasteband, B. (2026). Deformation and Load‐Carrying Capacity of Cone‐Shaped Tensegrity Membranes Under Snow Loads: An Inelastic‐Membrane Analysis. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/8930931

Vancouver

Talebi S, Sarmasti H, Abedi K, Shekasteband B. Deformation and Load‐Carrying Capacity of Cone‐Shaped Tensegrity Membranes Under Snow Loads: An Inelastic‐Membrane Analysis. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/8930931

BibTeX
@article{Talebi2026,
  author = {Talebi, Somayeh and Sarmasti, Hadi and Abedi, Karim and Shekasteband, Behzad},
  title = {Deformation and Load‐Carrying Capacity of Cone‐Shaped Tensegrity Membranes Under Snow Loads: An Inelastic‐Membrane Analysis},
  journal = {Advances in Civil Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/adce/8930931}
}
Kostenlos starten →