Thermal and Mechanical Characterisation of Adobe Blocks Reinforced With Baobab Fruit Fibres for Sustainable Construction
Advances in Civil Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/adce/7555695 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 15.11.2026. Verfasst von J. B. Tefoyem und 7 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Baobab fruit processing generates a fibrous residue that is generally discarded despite its potential use in earthen construction. This study evaluates the effects of incorporating baobab fruit fibres ( Adansonia digitata L.) into adobe blocks manufactured from a locally used sandy‐clay soil in northern Cameroon. Six formulations containing 0%, 0.2%, 0.4%, 0.6%, 0.8% and 1.0% fibres by dry soil mass were investigated. Thermal specimens were characterised by the asymmetric transient hot‐plate method, with three processed tests per formulation. The thermal engineering comparison focuses on apparent effective conductivity identified by a two‐stage inverse procedure. Flexural strength, compressive strength, apparent bulk density and linear shrinkage were also measured on three specimens per formulation. The archived inverse‐model conductivity estimates ranged from 1.8365 ± 0.0196 W/m·K for the reference adobe to 0.3562 ± 0.0099 W/m·K at 1.0% fibre content. These fitted values have not been independently validated and therefore do not establish a physical insulation‐performance gain. Mechanical performance was highest at 0.6% fibre content, where flexural strength reached 1.04 MPa and compressive strength 3.08 MPa, while apparent bulk density and linear shrinkage were 1.626 g/cm 3 and 2.83%, respectively. At 1.0% fibre content, both strengths fell below those of the unreinforced reference (0.44 versus 0.54 MPa in flexure and 1.63 versus 1.89 MPa in compression). The mechanical results indicate a beneficial response at intermediate fibre contents, whereas the thermal trend remains conditional on the inverse‐model assumptions and requires independent validation. Moisture resistance and durability must be assessed before construction qualification.
Zitieren
APA
Tefoyem, J. B., Mha, B. Z., Moubeke, C. A., Sanga, R. P. L., Malgnan, A., Hamdaoui, M., Ntamack, G. E., & d’Ouazzane, S. C. (2026). Thermal and Mechanical Characterisation of Adobe Blocks Reinforced With Baobab Fruit Fibres for Sustainable Construction. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/7555695
Vancouver
Tefoyem JB, Mha BZ, Moubeke CA, Sanga RPL, Malgnan A, Hamdaoui M, et al. Thermal and Mechanical Characterisation of Adobe Blocks Reinforced With Baobab Fruit Fibres for Sustainable Construction. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/7555695
BibTeX
@article{Tefoyem2026,
author = {Tefoyem, J. B. and Mha, B. Zra and Moubeke, C. A. and Sanga, R. P. Lemanle and Malgnan, A. and Hamdaoui, Mohamed and Ntamack, G. E. and d’Ouazzane, S. Charif},
title = {Thermal and Mechanical Characterisation of Adobe Blocks Reinforced With Baobab Fruit Fibres for Sustainable Construction},
journal = {Advances in Civil Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/adce/7555695}
}
EUVIMED