EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Analysis of the Flexural Performance of CFRP Grid‐Reinforced Two‐Way Concrete Slabs

Mastewal Tsegaye Getaneh, Tesfaye Alemu Mohammed, Awoke Kelemu Tamene, Temesgen Ejigu Alene

Advances in Civil Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/adce/7210353 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 25.06.2026. Verfasst von Mastewal Tsegaye Getaneh und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon fiber‐reinforced polymer (CFRP) reinforcement has become an attractive alternative to steel in concrete members exposed to corrosive service environments because of its high tensile strength, low self‐weight, and immunity to corrosion. Although CFRP bars, sheets, and strengthening systems have been studied extensively, the structural response of CFRP grids used as internal reinforcement in two‐way slabs remains less clearly established. This manuscript presents a nonlinear finite element investigation of CFRP grid‐reinforced concrete slabs developed in ANSYS Mechanical APDL and benchmarked against the experimental slab reported by Aljazaeri et al. (2020). After model validation, a parametric program was carried out to examine the effects of concrete compressive strength, the number of bottom CFRP grid layers, and CFRP fiber volume fraction on flexural behavior. The numerical model reproduced the experimental ultimate load with a 2.12% difference and showed good agreement in the crack pattern. The parametric results indicate that increasing the fiber volume fraction from 20% to 30%, 40%, and 50% increased ultimate load by 6.25%, 19.71%, and 35.63%, respectively. Raising the concrete strength from 56 to 60 MPa increased capacity by 6.9%, whereas reducing it to 40 MPa, lowered capacity by 7.79%. Adding a second bottom CFRP grid layer increased the ultimate load by 29.4%. Overall, the results show that fiber volume fraction exerts a stronger influence on slab capacity than concrete strength within the ranges examined.

Zitieren

APA

Getaneh, M. T., Mohammed, T. A., Tamene, A. K., & Alene, T. E. (2026). Finite Element Analysis of the Flexural Performance of CFRP Grid‐Reinforced Two‐Way Concrete Slabs. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/7210353

Vancouver

Getaneh MT, Mohammed TA, Tamene AK, Alene TE. Finite Element Analysis of the Flexural Performance of CFRP Grid‐Reinforced Two‐Way Concrete Slabs. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/7210353

BibTeX
@article{Getaneh2026,
  author = {Getaneh, Mastewal Tsegaye and Mohammed, Tesfaye Alemu and Tamene, Awoke Kelemu and Alene, Temesgen Ejigu},
  title = {Finite Element Analysis of the Flexural Performance of CFRP Grid‐Reinforced Two‐Way Concrete Slabs},
  journal = {Advances in Civil Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/adce/7210353}
}
Kostenlos starten →