EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hysteretic Behavior of the Lubricated Curved Surface Slider Under Variable Contact Pressure

Mianyue Yang, Juncheng Lv, Ai Qi, Yingxiong Wu, Mianchao Yang

Advances in Civil Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/adce/5097768 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 10.04.2026. Verfasst von Mianyue Yang und 4 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Huaiyin Institute of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lubricated curved surface sliders (L‐CSSs) with modified ultrahigh‐molecular‐weight polyethylene (M‐UHMWPE) are highlighted in the prevention of bearing failure due to the high‐temperature degradation of friction materials during high‐speed operation. This is vital for seismic isolation in large‐span bridges; however, their hysteretic behavior under the variable contact pressure induced by seismic vertical actions is underexplored. For this reason, a theoretical model of the CSS under variable contact pressure was developed. It is evident that variable contact pressure primarily affects the hysteretic performance of the bearing by altering the restoring force and friction force in real‐time. Dynamic cyclic tests were conducted at contact pressures ranging from 30 to 90 MPa and frequencies from 0.01 to 0.03 Hz. Test results demonstrated stable hysteretic behavior, with breakaway and average friction coefficients exhibiting minimal fluctuations. The accumulative dissipated energy increased significantly with contact pressure, achieving a maximum gain of 362.25%, while the equivalent damping ratio exhibited a maximum change of 14.6%, initially decreasing and then increasing. Loading frequency had a minor effect, with accumulated dissipated energy decreasing by up to 7.5% and the equivalent damping ratio varying by up to 6.7%. Finally, a validated finite element model further analyzed the influence of the amplitude, frequency, and time phase of variable contact pressure, revealing an irregular parallelogram‐shaped hysteresis curve. The shape of hysteretic curves and energy dissipation capacity were significantly affected by these parameters. These findings enhance the understanding of L‐CSS performance in bridge seismic isolation, providing critical insights for design under dynamic loading conditions.

Förderung

  • National Natural Science Foundation of China
  • Huaiyin Institute of Technology

Zitieren

APA

Yang, M., Lv, J., Qi, A., Wu, Y., & Yang, M. (2026). Hysteretic Behavior of the Lubricated Curved Surface Slider Under Variable Contact Pressure. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/5097768

Vancouver

Yang M, Lv J, Qi A, Wu Y, Yang M. Hysteretic Behavior of the Lubricated Curved Surface Slider Under Variable Contact Pressure. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/5097768

BibTeX
@article{Yang2026,
  author = {Yang, Mianyue and Lv, Juncheng and Qi, Ai and Wu, Yingxiong and Yang, Mianchao},
  title = {Hysteretic Behavior of the Lubricated Curved Surface Slider Under Variable Contact Pressure},
  journal = {Advances in Civil Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/adce/5097768}
}
Kostenlos starten →