EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Cement Types on Mechanical Strength, Durability, and Unit Production Cost of Concrete

Mohammad Shifat Hossain Khan, Mohammad Al Amin Siddique

Advances in Civil Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/adce/4907097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 18.05.2026. Verfasst von Mohammad Shifat Hossain Khan und 1 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The primary aim of the present study is to identify the optimal cement type by jointly assessing mechanical performance, durability performance, and cost‐effectiveness using multicriteria decision‐making (MCDM) approaches. This study investigates the effects of four cement types commonly used in Bangladesh—CEM I/OPC, CEM II/A‐M (S‐V‐L), CEM II/B‐M (S‐V‐L), and CEM II/B‐L/PLC across water‐to‐cement ratios (w/c) ranging from 0.40 to 0.65. An extensive experimental program was designed to assess the mechanical strength and durability performance of concrete. A generalized pattern for the compressive strength of concrete was found to be CEM I > CEM II/A‐M > CEM II/B‐L > CEM II/B‐M. Moreover, at w/c = 0.40, concrete made with CEM I exhibited ~20% higher compressive strength over CEM II/B‐M; at w/c = 0.65, the margin increased to ~50%. The durability of concrete was assessed using the rapid chloride permeability test. Surprisingly, CEM II/B‐L cement‐made concrete shows the highest chloride permeability, whereas CEM II/B‐M cement‐made concrete shows the lowest. In this study, a graphical analysis is proposed to determine the optimal cement type, accounting for strength, durability, and cost‐effectiveness in concrete production. Nevertheless, the multicriteria decision‐making (MCDM) technique, such as simple additive weighting (SAW), is presented to compact the findings of this study. Also, findings from the graphical analysis of the presented study were correlated with the SAW analysis within the scope of the current study. Lastly, the technique for order of preference by similarity to ideal solution (TOPSIS) MCDM approach has been presented to identify a more precise optimal cement type based on three parameters (strength, RCPT, and cost) within the scope of the study.

Zitieren

APA

Khan, M. S. H., & Siddique, M. A. A. (2026). Effect of Cement Types on Mechanical Strength, Durability, and Unit Production Cost of Concrete. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/4907097

Vancouver

Khan MSH, Siddique MAA. Effect of Cement Types on Mechanical Strength, Durability, and Unit Production Cost of Concrete. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/4907097

BibTeX
@article{Khan2026,
  author = {Khan, Mohammad Shifat Hossain and Siddique, Mohammad Al Amin},
  title = {Effect of Cement Types on Mechanical Strength, Durability, and Unit Production Cost of Concrete},
  journal = {Advances in Civil Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/adce/4907097}
}
Kostenlos starten →