Study on the Uniaxial Compression Failure Characteristics and Thermal Damage Constitutive Model of Concrete After Fire Exposure
Advances in Civil Engineering · 2025-01 · 2025 (1)
DOI: 10.1155/adce/4278691 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 14.11.2025. Verfasst von Wei Chen und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Humanities and Social Sciences Youth Foundation, Ministry of Education, National Natural Science Foundation of China.
Abstract (Originalsprache)
In recent years, building fires have become more frequent, leading to significant degradation of concrete’s mechanical properties after fire exposure. This reduction in strength affects the structural performance and load‐bearing capacity of concrete, posing serious risks to building safety. Therefore, studying the failure characteristics and constitutive models of concrete after fire exposure is crucial. In order to investigate coupling effect of temperature and constant temperature duration on the fracture mode of concrete, this article employs methods such as experiments, theoretical analysis, and numerical simulation to analyze the fracture characteristics and constitutive model of concrete under the conditions of 20–800°C and constant temperature for 1 and 2 h, aiming to break through the limitation that traditional studies only focus on the single factor of temperature. The results reveal that as the fire temperature and holding time increase, the physical properties of concrete change significantly. The mass loss rate gradually increases, and the concrete color changes from gray (200°C) to light yellow (400°C), yellow‐white (600°C), and reddish‐brown (800°C). As the temperature rises, the stress–strain curve flattens, the slope decreases, the compaction phase becomes more pronounced, the peak strain increases, and the peak point shifts downward and to the right, indicating a transition from brittle to ductile behavior. Additionally, as the temperature increases, the failure rate slows down, and the number of cracks increases. Cracks predominantly form in the bonded fine aggregate regions, and when encountering larger particles, they tend to propagate along the interfaces of these particles, with less damage occurring to the larger particles themselves. A statistical damage constitutive model based on the Weibull distribution function was established. The theoretical curves closely match the experimental data, effectively capturing the various mechanical behaviors of concrete after high‐temperature exposure, including brittleness, plasticity, and strain softening, thereby validating the model’s applicability. As temperature increases, thermal stresses induce internal damage in the concrete, leading to a rise in tensile‐shear failure between particles. Moreover, at the same temperature, an increase in holding time results in a significant reduction in concrete strength and deformation resistance, highlighting the time effect. These findings offer a theoretical foundation for assessing and repairing concrete components after fire exposure and contribute to advancing the theory of fire‐resistant design for concrete structures.
Förderung
- Humanities and Social Sciences Youth Foundation, Ministry of Education
- National Natural Science Foundation of China
Zitieren
APA
Chen, W., Gao, M., Gao, Y., He, Z., Han, M., & Li, T. (2025). Study on the Uniaxial Compression Failure Characteristics and Thermal Damage Constitutive Model of Concrete After Fire Exposure. Advances in Civil Engineering, 2025(1). https://doi.org/10.1155/adce/4278691
Vancouver
Chen W, Gao M, Gao Y, He Z, Han M, Li T. Study on the Uniaxial Compression Failure Characteristics and Thermal Damage Constitutive Model of Concrete After Fire Exposure. Advances in Civil Engineering. 2025;2025(1). doi:10.1155/adce/4278691
BibTeX
@article{Chen2025,
author = {Chen, Wei and Gao, Meiben and Gao, Yang and He, Zhihao and Han, Mengting and Li, Tianbin},
title = {Study on the Uniaxial Compression Failure Characteristics and Thermal Damage Constitutive Model of Concrete After Fire Exposure},
journal = {Advances in Civil Engineering},
year = {2025},
volume = {2025},
number = {1},
doi = {10.1155/adce/4278691}
}
EUVIMED