EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Ferrous Slag Composition on Properties of Carbonated Ferrous Slag–Calcium Carbide Slag Brick

Weida Cao, Quanbing Yang

Advances in Civil Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/adce/2982055 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 08.07.2026. Verfasst von Weida Cao und 1 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study develops a carbonated ferrous slag–calcium carbide slag (FS‐CCS) brick, carbonated under a simulated CO 2 concentration (~20%) representative of typical iron and steel industry waste gas. The influence of ferrous slag composition, that is, the proportions of steel slag (SS) and ground granulated blast furnace slag (GGBFS), on the performance of both carbonated and uncarbonated bricks was systematically investigated, along with the underlying carbonation mechanisms. The results indicate that carbonation enhances compressive strength by up to 281% (from 5.3 to 20.2 MPa for 100% SS mix), reduces water absorption by up to 21.5% (from 13.0% to 10.2% for 100% SS mix), improves volume stability, and completely resolves soundness issues. Increasing SS content amplifies the carbonation improvement on compressive strength and water absorption, but diminishes the improvement on drying shrinkage. The CO 2 ‐sequestration rate of the carbonated brick rises with SS content, reaching 6.44% for the 100% SS mix. Microstructural analysis reveals that a higher SS content favors the pore‐filling precipitation of CaCO 3 (a positive effect) over the decomposition of C–S–H (a negative effect), elucidating the observed performance trends. The optimal ferrous slag composition for the carbonated brick is 100% SS. The resulting product exhibits a compressive strength of 20.2 MPa, water absorption of 10.2%, dry shrinkage of 0.034% and eligible soundness, fully meeting the MU20 specifications for building bricks. Moreover, it is superior to conventional MU20 building brick available on the market due to its favorable properties, high CO 2 ‐sequestration rate and high SS utilization rate. This makes it a viable candidate for nonload‐bearing and low‐load‐bearing applications, including partition walls, pavement blocks, curbs, and so on, demonstrating its strong potential as a sustainable construction material derived from industrial by‐products.

Zitieren

APA

Cao, W., & Yang, Q. (2026). Effects of Ferrous Slag Composition on Properties of Carbonated Ferrous Slag–Calcium Carbide Slag Brick. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/2982055

Vancouver

Cao W, Yang Q. Effects of Ferrous Slag Composition on Properties of Carbonated Ferrous Slag–Calcium Carbide Slag Brick. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/2982055

BibTeX
@article{Cao2026,
  author = {Cao, Weida and Yang, Quanbing},
  title = {Effects of Ferrous Slag Composition on Properties of Carbonated Ferrous Slag–Calcium Carbide Slag Brick},
  journal = {Advances in Civil Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/adce/2982055}
}
Kostenlos starten →