EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bitumen-Biopolymer Materials Modified with Polylactic Acid with Improved Physical and Chemical Properties

Assel Jexembayeva, Marat Konkanov, Larisa Mamedova, Lyazat Aruova

Advances in Polymer Technology · 24.05.2024 · 2024 · 1-7

DOI: 10.1155/2024/5586270 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Polymer Technology, erschienen am 24.05.2024. Verfasst von Assel Jexembayeva und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Science of the Republic of Kazakhstan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the continuous expansion of the global automobile fleet, there is an escalating demand to enhance and maintain current road infrastructure. Given the information provided, there will be a growing demand for bitumen, a key raw material used in the manufacturing of asphalt. Bitumen may account for up to 60% of the total usage in asphalt production. This study aims to determine the effect of different content of polylactic acid (PLA) on the change in the chemical and physical properties of biopolymer bitumen during its modification. This study was carried out by using a sample of petroleum road bitumen from CASPI BITUM (Kazakhstan) and a sample of PLA from Zhejiang Hisun (China). As a part of the research, the change of quality indicators of biopolymer bitumen when adding 4%–10% of PLA to it has been established. The results showed that the values of the average molecular weight and average molar mass increased with increasing the content of PLA in biopolymer bitumen. In particular, when the PLA content in biopolymer bitumen increased up to 10%, the average molecular weight of the biopolymer bitumen increased from 1,263 to 2,759 Mw and the average molar mass increased from 1,215 to 1,395 Mn. It was shown that increasing the PLA content in biopolymer bitumen from 0% to 10% leads to an increase in the softening temperature from 47 to 70°C or ∼ 49%. It was found that all examined samples of biopolymer bitumen are characterized by increased plasticity at 25°C (>100 cm). It has been established that the addition of 8% PLA to bitumen allows one to obtain a biopolymer bitumen of optimal quality. The results obtained can be used to produce road biopolymer bitumen.

Förderung

  • Ministry of Education and Science of the Republic of Kazakhstan

Zitieren

APA

Jexembayeva, A., Konkanov, M., Mamedova, L., & Aruova, L. (2024). Bitumen-Biopolymer Materials Modified with Polylactic Acid with Improved Physical and Chemical Properties. Advances in Polymer Technology, 2024, 1-7. https://doi.org/10.1155/2024/5586270

Vancouver

Jexembayeva A, Konkanov M, Mamedova L, Aruova L. Bitumen-Biopolymer Materials Modified with Polylactic Acid with Improved Physical and Chemical Properties. Advances in Polymer Technology. 2024;2024:1-7. doi:10.1155/2024/5586270

BibTeX
@article{Jexembayeva2024,
  author = {Jexembayeva, Assel and Konkanov, Marat and Mamedova, Larisa and Aruova, Lyazat},
  title = {Bitumen-Biopolymer Materials Modified with Polylactic Acid with Improved Physical and Chemical Properties},
  journal = {Advances in Polymer Technology},
  year = {2024},
  volume = {2024},
  pages = {1--7},
  doi = {10.1155/2024/5586270}
}
Kostenlos starten →