EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of Retained Austenite in Advanced High-Strength Steel

Shouhua Li, Kejian Li iD, Longzhu Zhang, Yi Feng, Ziquan Liu, Pengjun Cao, Bo Liu, Jiling Dong iD

Scanning · 17.04.2023 · 2023 · 1-10

DOI: 10.1155/2023/9565903 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scanning, erschienen am 17.04.2023. Verfasst von Shouhua Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: HBIS Hansteel Technology Center, Handan, Hebei 056015, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Innovation Research Group of Universities in Chongqing, Natural Science Foundation of Chongqing, State Key Laboratory of Vehicle NVH and Safety Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The retained austenite (RA) in advanced high-strength steels directly affects their plasticity. It is very important for the accurate characterization of their content and types. This paper prepared three specimens with three different Mn contents (1.0%, 1.4%, and 1.7%) that are used to obtain high-strength steel by ultrafast cooling heat treatment. The volume content and distribution of the RA were analysed by an X-ray Debye ring measurement system, electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). In addition, the mechanical tensile test provided the tensile properties and elongation of three specimens. It was finally concluded that when the content of Mn increased, the island-type and thin film-type RA both increased, which may effectively improve the plasticity of the martensitic steels.

Autor:innen und Institutionen

  • HBIS Hansteel Technology Center, Handan, Hebei 056015, China.
  • School of Metallurgy and Materials Engineering, Chongqing University of Science & Technology, Chongqing 401331, China.
  • College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China.
  • China Automotive Engineering Research Institute Co., Ltd., Chongqing 401122, China.
  • School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China.

ORCID-Profile: Kejian Li, Jiling Dong

Förderung

  • Innovation Research Group of Universities in Chongqing
  • Natural Science Foundation of Chongqing
  • State Key Laboratory of Vehicle NVH and Safety Technology

Zitieren

APA

Li, S., Li, K., Zhang, L., Feng, Y., Liu, Z., Cao, P., Liu, B., & Dong, J. (2023). Characterization of Retained Austenite in Advanced High-Strength Steel. Scanning, 2023, 1-10. https://doi.org/10.1155/2023/9565903

Vancouver

Li S, Li K, Zhang L, Feng Y, Liu Z, Cao P, et al. Characterization of Retained Austenite in Advanced High-Strength Steel. Scanning. 2023;2023:1-10. doi:10.1155/2023/9565903

BibTeX
@article{Li2023,
  author = {Li, Shouhua and Li, Kejian and Zhang, Longzhu and Feng, Yi and Liu, Ziquan and Cao, Pengjun and Liu, Bo and Dong, Jiling},
  title = {Characterization of Retained Austenite in Advanced High-Strength Steel},
  journal = {Scanning},
  year = {2023},
  volume = {2023},
  pages = {1--10},
  doi = {10.1155/2023/9565903}
}
Kostenlos starten →