EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Mechanical Behavior and Surface Characteristics of Cold Spray Metallized B4C/AA7075 Composites Coated by AZ64 Alloy through Plasma Electrolytic Oxidation

Selvakumaran Thunaipragasam, Aniket Bhanudas Kolekar, Koli Gajanan Chandrashekhar, Rohit Pandey, Mohammad Shahid, K. Rajesh, P. Ragupathi, Asheesh Kumar, Balkeshwar Singh

Journal of Nanomaterials · 20.04.2023 · 2023 · 1-11

DOI: 10.1155/2023/7267093 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Nanomaterials, erschienen am 20.04.2023. Verfasst von Selvakumaran Thunaipragasam und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metallized cold-spray coatings were employed to make B4C/AA7075 and aluminum + plasma electrolytic oxidation (PEO) duplex coatings on AZ64. In addition, the phase structure, mechanical characteristics, wear, and PEO ceramic coatings examine the corrosion resistance. According to the findings, the PEO ceramic coating comprises α-aluminum oxide and γ-aluminum oxide, with some remnants of B4C still being preserved. PEO ceramic coatings outperformed their corresponding CS counterparts regarding mechanical characteristics and wear resistance. For example, the PEO-B4C coating achieved a hardness of 13.8 GPa and an elastic modulus of 185.5 GPa, which were 21.0% and 23.5%, respectively, more significant than the comparable values for the coating with CS. The PEO-B4C coating was 58% and 15.7% less abrasive than the equivalent CS coating due to its lower wear rate of 4.84 × 10−5 mm3/Nm and relatively lower of 0.64. The density of corrosion current in the PEO-treated B4C-AA7075 coating (3.735 × 106 A/cm2) is similar to the corrosion current density in the untreated CS coatings. Finally, compared to untreated CS B4C-AA7075, the coating’s mechanical characteristics and wear resistance are considerably enhanced by the PEO treatment.

Zitieren

APA

Thunaipragasam, S., Kolekar, A. B., Chandrashekhar, K. G., Pandey, R., Shahid, M., Rajesh, K., Ragupathi, P., Kumar, A., & Singh, B. (2023). Investigation of Mechanical Behavior and Surface Characteristics of Cold Spray Metallized B4C/AA7075 Composites Coated by AZ64 Alloy through Plasma Electrolytic Oxidation. Journal of Nanomaterials, 2023, 1-11. https://doi.org/10.1155/2023/7267093

Vancouver

Thunaipragasam S, Kolekar AB, Chandrashekhar KG, Pandey R, Shahid M, Rajesh K, et al. Investigation of Mechanical Behavior and Surface Characteristics of Cold Spray Metallized B4C/AA7075 Composites Coated by AZ64 Alloy through Plasma Electrolytic Oxidation. Journal of Nanomaterials. 2023;2023:1-11. doi:10.1155/2023/7267093

BibTeX
@article{Thunaipragasam2023,
  author = {Thunaipragasam, Selvakumaran and Kolekar, Aniket Bhanudas and Chandrashekhar, Koli Gajanan and Pandey, Rohit and Shahid, Mohammad and Rajesh, K. and Ragupathi, P. and Kumar, Asheesh and Singh, Balkeshwar},
  title = {Investigation of Mechanical Behavior and Surface Characteristics of Cold Spray Metallized B4C/AA7075 Composites Coated by AZ64 Alloy through Plasma Electrolytic Oxidation},
  journal = {Journal of Nanomaterials},
  year = {2023},
  volume = {2023},
  pages = {1--11},
  doi = {10.1155/2023/7267093}
}
Kostenlos starten →