EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Combination of Vision‐ and Sensor‐Based Defect Classifications in Extrusion‐Based Additive Manufacturing

Xiao-Yu Li, Fu-Long Liu, Meng-Na Zhang, Ming-Xia Zhou, Chuan Wu, Xiao Zhang

Journal of Sensors · 2023-01 · 2023 (1)

DOI: 10.1155/2023/1441936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Sensors, online erschienen am 06.03.2023. Verfasst von Xiao-Yu Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing, also known as 3D printing, has been facing the problem of inconsistent processing defects and product quality as a transformative technology, thus hindering its wide application in industry and other fields. In this context, machine learning (ML) algorithms are increasingly used for automatic classification of process data to achieve computer‐aided defect detection. Specifically, in this paper, two data‐driven classification prediction models are built by monitoring the sensing signals (temperature and vibration data) and interlayer images during the printing process, using the fused deposition model (FDM) as the base case, and the prediction results of the two machine learning models are fused for prediction. The experimental results show that by fusing the prediction results of the two models, the classification accuracy is significantly higher than the prediction results of a single model. These findings can benefit researchers studying FDM with the goal of producing systems that self‐adjust online for quality assurance.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Li, X., Liu, F., Zhang, M., Zhou, M., Wu, C., & Zhang, X. (2023). A Combination of Vision‐ and Sensor‐Based Defect Classifications in Extrusion‐Based Additive Manufacturing. Journal of Sensors, 2023(1). https://doi.org/10.1155/2023/1441936

Vancouver

Li X, Liu F, Zhang M, Zhou M, Wu C, Zhang X. A Combination of Vision‐ and Sensor‐Based Defect Classifications in Extrusion‐Based Additive Manufacturing. Journal of Sensors. 2023;2023(1). doi:10.1155/2023/1441936

BibTeX
@article{Li2023,
  author = {Li, Xiao-Yu and Liu, Fu-Long and Zhang, Meng-Na and Zhou, Ming-Xia and Wu, Chuan and Zhang, Xiao},
  title = {A Combination of Vision‐ and Sensor‐Based Defect Classifications in Extrusion‐Based Additive Manufacturing},
  journal = {Journal of Sensors},
  year = {2023},
  volume = {2023},
  number = {1},
  doi = {10.1155/2023/1441936}
}
Kostenlos starten →