EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect on Compression Molding Parameters in Mechanical Properties of MWCNT/Glass Fiber/Epoxy Composites

Jayaprakash Venugopal, B. Dhanasakkaravarthi, Raviteja Surakasi, Moti Lal Rinawa, L. H. Manjunatha, Razan A. Alshgari, Saikh Mohammad Wabaidur, Md Ataul Islam, I. Jenish

Advances in Polymer Technology · 18.07.2022 · 2022 · 1-7

DOI: 10.1155/2022/9295407 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Polymer Technology, erschienen am 18.07.2022. Verfasst von Jayaprakash Venugopal und 8 weiteren Autor:innen. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: REVA University, University Of Manchester, King Saud University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reinforcing fibers, nanofillers, matrix materials, and manufacturing techniques all have a role in the mechanical characteristics of hybrid composites. MWCNTs-reinforced E-glass/Kevlar/epoxy composites are appropriate fillers for structural applications. The impact of different concentrations of MWCNT fillers (0.4%, 0.8%, and 1.2% wt) on the mechanical characteristics of hybrid composites has been studied. Tensile and bending strength, as well as hardness, were measured in compression-molded composites. The effects of compression pressure, mold temperature, and applied pressure on hybrid (0.8% MWCNT) were investigated. When it came to composite tensile and bending strength, compression pressure was the most important factor, closely succeeded by mold temperature and pressure period. Compression molding were optimized, resulting in a tensile strength of 183 MPa, a bending strength of 158.3 MPa, and a hardness value of 23.8 HV.

Förderung

  • REVA University
  • University Of Manchester
  • King Saud University
  • Lendi Institute of Engineering and Technology
  • Sathyabama Institute of Science and Technology
  • Seenu Atoll School

Zitieren

APA

Venugopal, J., Dhanasakkaravarthi, B., Surakasi, R., Rinawa, M. L., Manjunatha, L. H., Alshgari, R. A., Wabaidur, S. M., Islam, M. A., & Jenish, I. (2022). Effect on Compression Molding Parameters in Mechanical Properties of MWCNT/Glass Fiber/Epoxy Composites. Advances in Polymer Technology, 2022, 1-7. https://doi.org/10.1155/2022/9295407

Vancouver

Venugopal J, Dhanasakkaravarthi B, Surakasi R, Rinawa ML, Manjunatha LH, Alshgari RA, et al. Effect on Compression Molding Parameters in Mechanical Properties of MWCNT/Glass Fiber/Epoxy Composites. Advances in Polymer Technology. 2022;2022:1-7. doi:10.1155/2022/9295407

BibTeX
@article{Venugopal2022,
  author = {Venugopal, Jayaprakash and Dhanasakkaravarthi, B. and Surakasi, Raviteja and Rinawa, Moti Lal and Manjunatha, L. H. and Alshgari, Razan A. and Wabaidur, Saikh Mohammad and Islam, Md Ataul and Jenish, I.},
  title = {Effect on Compression Molding Parameters in Mechanical Properties of MWCNT/Glass Fiber/Epoxy Composites},
  journal = {Advances in Polymer Technology},
  year = {2022},
  volume = {2022},
  pages = {1--7},
  doi = {10.1155/2022/9295407}
}
Kostenlos starten →