EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Optimization of a Wind Turbine for Rural Household Electrification in Machakos, Kenya

Kennedy Muchiri, Joseph Ngugi Kamau, David Wafula Wekesa, Churchill Otieno Saoke, Joseph Ndisya Mutuku, Joseph Kimiri Gathua

Journal of Renewable Energy · 15.09.2022 · 2022 · 1-9

DOI: 10.1155/2022/8297972 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Renewable Energy, erschienen am 15.09.2022. Verfasst von Kennedy Muchiri und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Fund, Kenya, Jomo Kenyatta University of Agriculture and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Machakos is an area characterized by low wind speeds in the range of 0.5 m/s to 5 m/s with an annual average wind speed of 3.5 m/s. Maximum power generation from wind requires the appropriate design of the conversion system. In this study, two HAWT rotor blades were fabricated using Styrofoam and aluminium with a pitching mechanism to maximize power. The system was tested in a wind tunnel environment at a wind speed range of 0 m/s−20 m/s. RPMs and torque were measured and then used to calculate the TSR and power coefficients at different pitching angles. Energy optimization was performed by varying the pitch angles from 0 to 40 degree and rotational speeds, blade shape, and also a variation of blade materials. The analysis of tip speed ratios showed positive skewness implying high potential for significant energy generation at low wind speeds. At the rated wind speed of 5 m/s, Styrofoam blades performed optimally at a pitch angle of 20 degree with a tip speed ratio (TSR) of 2.1 corresponding to a Cp of 0.465. This translates to 238 W of power. Aluminium type performed optimally at a pitch angle of 15 degree with a TSR of 1.9 corresponding to a CP of 0.431, a power estimate of 220 W. These findings showed that Styrofoam blades were more effective and thus suitable for application in wind systems. The understanding gained from this study could be useful to the HAWT research community and can be extended to the turbine designs for small-scale microgrids and utility applications.

Förderung

  • National Research Fund, Kenya
  • Jomo Kenyatta University of Agriculture and Technology

Zitieren

APA

Muchiri, K., Kamau, J. N., Wekesa, D. W., Saoke, C. O., Mutuku, J. N., & Gathua, J. K. (2022). Design and Optimization of a Wind Turbine for Rural Household Electrification in Machakos, Kenya. Journal of Renewable Energy, 2022, 1-9. https://doi.org/10.1155/2022/8297972

Vancouver

Muchiri K, Kamau JN, Wekesa DW, Saoke CO, Mutuku JN, Gathua JK. Design and Optimization of a Wind Turbine for Rural Household Electrification in Machakos, Kenya. Journal of Renewable Energy. 2022;2022:1-9. doi:10.1155/2022/8297972

BibTeX
@article{Muchiri2022,
  author = {Muchiri, Kennedy and Kamau, Joseph Ngugi and Wekesa, David Wafula and Saoke, Churchill Otieno and Mutuku, Joseph Ndisya and Gathua, Joseph Kimiri},
  title = {Design and Optimization of a Wind Turbine for Rural Household Electrification in Machakos, Kenya},
  journal = {Journal of Renewable Energy},
  year = {2022},
  volume = {2022},
  pages = {1--9},
  doi = {10.1155/2022/8297972}
}
Kostenlos starten →