EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Case Studies on Enhanced Heat Transfer in a Square Duct with Modified V-Shaped Ribs (MVR): A CFD Analysis

Amnart Boonloi, Withada Jedsadaratanachai

Modelling and Simulation in Engineering · 18.01.2022 · 2022 · 1-12

DOI: 10.1155/2022/5376486 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Modelling and Simulation in Engineering, erschienen am 18.01.2022. Verfasst von Amnart Boonloi und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Mongkut's University of Technology North Bangkok.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research presents structural improvement of V-shaped ribs for a tested square duct (TSD). The V-shaped ribs, which are inserted at the middle of the TSD (called type A), and the V-shaped ribs, which are placed on the opposite TSD walls (called type B), are modified to increase the structural stabilization. The effects of rib height to duct height, b / H = 0.05 – 0.30 ; V-shaped bar thickness to duct height, a / H = 0.025 and 0.050; and flow directions (V-Upstream and V-Downstream) are considered. The new design of the V-shaped ribs is called “modified V-shaped ribs or MVR.” The present problem is solved by the numerical method (commercial code). The flow and heat transfer features of the TSD are illustrated. The numerical result reveals that the MVR give both flow and heat transfer patterns similarly as the general V-shaped rib. The impinging flows, swirling flows, and disturbing thermal boundary layer, which lead to enhanced heat transfer, are observed. Over the investigated range, the enhanced heat transfer about 18.12 times above the smooth duct with the optimal thermal enhancement factor about 4.16 is detected.

Förderung

  • King Mongkut's University of Technology North Bangkok

Zitieren

APA

Boonloi, A., & Jedsadaratanachai, W. (2022). Case Studies on Enhanced Heat Transfer in a Square Duct with Modified V-Shaped Ribs (MVR): A CFD Analysis. Modelling and Simulation in Engineering, 2022, 1-12. https://doi.org/10.1155/2022/5376486

Vancouver

Boonloi A, Jedsadaratanachai W. Case Studies on Enhanced Heat Transfer in a Square Duct with Modified V-Shaped Ribs (MVR): A CFD Analysis. Modelling and Simulation in Engineering. 2022;2022:1-12. doi:10.1155/2022/5376486

BibTeX
@article{Boonloi2022,
  author = {Boonloi, Amnart and Jedsadaratanachai, Withada},
  title = {Case Studies on Enhanced Heat Transfer in a Square Duct with Modified V-Shaped Ribs (MVR): A CFD Analysis},
  journal = {Modelling and Simulation in Engineering},
  year = {2022},
  volume = {2022},
  pages = {1--12},
  doi = {10.1155/2022/5376486}
}
Kostenlos starten →