Synthesis and Characterization of Fe 3 O 4 ‐Bentonite Nanocomposite Adsorbent for Cr(VI) Removal from Water Solution
International Journal of Chemical Engineering · 2022-01 · 2022 (1)
DOI: 10.1155/2022/4441718 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Chemical Engineering, online erschienen am 09.09.2022. Verfasst von Ngusey Adisu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Bentonite‐magnetite nanocomposite adsorbent (BMNC) was made and investigated for its adsorption removal of Cr(VI) from an aqueous solution. This adsorbent was prepared by the coprecipitation method from sodium bentonite (BNa) with iron chloride solution at controlled pH and under an inert atmosphere. These adsorbents were characterized by atomic absorption spectrophotometer (AAS), Brunauer–Emmett–Teller (BET), dynamic light scattering (DLS), scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectroscopy, and X‐ray diffraction (XRD) analyses. Particle size of BMNC was in the range of 15 to 95 nm as per DLS. The intercalation of magnetite nanoparticles onto the bentonite clay increased its specific surface area from 142 to 177 m 2 /g as per BET analysis. Experimental design optimization results in 96.5% of Cr(VI) removal from the water solution at optimized adsorption parameters viz., adsorption time of 101 min, pH of 1.95, adsorbent dose of 1.12 g/L, and initial Cr(VI) concentration of 36.2 mg/L. The results of these studies demonstrate that the BMNC performs well. Moreover, the adsorption of Cr(VI) onto the BMNC was found to be the best fit with Langmuir isotherm ( R 2 = 0.9984) and a maximum adsorption capacity of 98 mg/g. The kinetics of the adsorption process was found to be a pseudo‐second‐order model ( R 2 = 0.9912). The BMNC also showed favourable reusability for adsorbate Cr(VI) ions removal from the water solution.
Zitieren
APA
Adisu, N., Balakrishnan, S., & Tibebe, H. (2022). Synthesis and Characterization of Fe 3 O 4 ‐Bentonite Nanocomposite Adsorbent for Cr(VI) Removal from Water Solution. International Journal of Chemical Engineering, 2022(1). https://doi.org/10.1155/2022/4441718
Vancouver
Adisu N, Balakrishnan S, Tibebe H. Synthesis and Characterization of Fe 3 O 4 ‐Bentonite Nanocomposite Adsorbent for Cr(VI) Removal from Water Solution. International Journal of Chemical Engineering. 2022;2022(1). doi:10.1155/2022/4441718
BibTeX
@article{Adisu2022,
author = {Adisu, Ngusey and Balakrishnan, Subramanian and Tibebe, Haimanot},
title = {Synthesis and Characterization of Fe 3 O 4 ‐Bentonite Nanocomposite Adsorbent for Cr(VI) Removal from Water Solution},
journal = {International Journal of Chemical Engineering},
year = {2022},
volume = {2022},
number = {1},
doi = {10.1155/2022/4441718}
}
EUVIMED